Blueberry Bourbon Barrel Aged IPL
intro
Bright, hop-forward India Pale Lager aged on bourbon-soaked oak and fresh blueberries, with warm vanilla notes, bright berry tang, and a crisp, dry finish perfect for summer sipping.
Ingredients
Steps
Soak bourbon oak cubes
Place 28g medium-toast American oak cubes into the 500ml clear mason jar, pour 60ml straight bourbon over the cubes to fully submerge them. Seal the jar tightly with its metal screw lid, and set aside in a cool dark place for 48 hours prior to brewing to draw out warm vanilla, caramel, and oak notes. Do not drain the bourbon; it will be added to the secondary fermenter along with the cubes.
Mash the crushed grains
Heat 3 liters of filtered water in the 5-gallon stainless steel brew pot on the inset induction cooktop to 67C (153F). Add the crushed 2-row pale malt and Carapils malt to the pot, stirring with the long slotted stainless steel spoon to eliminate dry clumps. Hold the temperature steady at 67C for 60 minutes, covering the pot with a lid, to convert grain starches to fermentable sugar. The resulting sweet wort will smell like fresh baked bread when starch conversion is complete.
Boil wort and add hops
After the 60-minute mash is complete, strain the sweet wort through the fine-mesh stainless steel strainer back into the brew pot, rinsing the spent grains with 1 liter of 77C (170F) filtered water to extract remaining sugar. Bring the strained wort to a gentle rolling boil (100C/212F) and hold for 60 minutes. Add the 7g of Magnum bittering hops at the start of the boil, and add the full 14g of Cascade aroma hops during the final 5 minutes of the boil to preserve bright citrus and pine hop notes. Adjust heat as needed to prevent sticky wort boilovers.
Chill and pitch yeast
After the 60-minute boil is complete, remove the pot from heat and chill the wort as quickly as possible to 12C (54F) by setting the pot in an ice bath. Once cooled, position the matte navy silicone funnel in the mouth of the 1-gallon clear glass fermenter, and pour the wort through the funnel into the vessel. Top up with cold filtered water if needed to reach the 1-gallon etched volume mark. Sprinkle the full packet of dry lager yeast over the wort surface, seal the fermenter with the black rubber stopper, and fill the 3-piece airlock halfway with sanitizer to allow gas to escape. Store the fermenter in a cool, dark space held at 12-13C (54-55F) for 14 days to complete primary fermentation, until bubbling in the airlock stops entirely.
Add blueberries and oak
After 14 days of primary fermentation, use the clear plastic auto-siphon to rack the clear beer off the settled pale yeast sediment into a clean, sanitized 1-gallon glass fermenter. Add the full batch of bourbon-soaked oak cubes (along with all remaining bourbon from the mason jar) and 227g of lightly crushed fresh blueberries to the secondary fermenter. Reseal with the rubber stopper and airlock, and let the beer age for 21 days at 12C (54F) to infuse bright blueberry flavor, warm bourbon warmth, and smooth vanilla oak notes.
Carbonate and condition
After 21 days of secondary aging, when the beer has taken on a faint blushed purple hue and smells of citrus hops, blueberry, and oak, siphon the beer into clean, sanitized 12oz glass bottles. Dissolve 28g of corn priming sugar in 30ml of boiling water, cool to room temperature, and divide evenly across the bottles to create natural carbonation. Seal bottles with crown caps using the bottle capper, and let condition at 18-20C (65-68F) for 10 days to build fizz, then chill to 4C (39F) for 24 hours before serving.
Tips
2.Freeze blueberries for 24 hours before adding to secondary fermentation: Freezing ruptures berry cell walls, releasing bright, fresh blueberry flavor without cooking the fruit (which would create dull, jammy notes).
3.Wait to add oak and fruit until primary fermentation is complete: Vigorous CO2 bubbles during active fermentation will scrub away delicate bourbon, oak, and blueberry aromas, leaving flat, woody, muted flavors instead of layered, balanced notes.

OMG, made this for our weekend cabin trip with friends and everyone went crazy for it! The blueberry isn't too sweet, the bourbon barrel notes are so smooth, it doesn't taste like a boozy fruit bomb at all. Only thing I messed up was letting the blueberry steep a little too long, got a tiny bit of tart pith bite, but still SO good.
Wait, this is medium difficulty? As someone who's only done basic extract homebrews before, I was intimidated, but the step by step was actually super easy to follow! Cook time lined up almost exactly with what was listed, too. I brought a growler to our neighborhood potluck last weekend and people were asking for the recipe before they even finished their first glass.
Game changer. I've made a lot of fruity lager recipes before but the bourbon barrel depth here is next level. Served it at my book club last night and half the group asked me to make a batch for our next meeting. Zero notes, 10/10.
Made this last weekend for our backyard BBQ and it was perfect for 90 degree weather! The only adjustment I made was adding an extra splash of bourbon at the end because my partner loves that extra oaky kick. Would absolutely make again for our next cookout.
Quick question — I don't have a dedicated bourbon barrel at home, can I use bourbon barrel aged chips instead to get that same flavor? I really don't want to drop money on a whole barrel for one batch.
My whole family loved this! My kids kept asking for refills (don't worry, I made a non-alcoholic blueberry version for them!) and even my dad who swears he hates "fruit beer" had two full glasses and asked me to teach him how to make it for his fishing trip next month. The balance between the hop bite, sweet blueberry, and warm bourbon is literally perfect.
Tasted great but the cook time listed was way off for me? It took me almost 3 and a half hours total between prep, steep time, and waiting for everything to cool down enough to pitch yeast. Maybe I'm just slow, but I wish the timing included cool down time so I could've planned better.
Made this for our Labor Day pool party and it was gone in 45 minutes! I was worried the bourbon flavor would be too strong for my friends who don't drink dark liquor, but it was so subtle and fruity that even the White Claw lovers were going back for refills. Game changer for summer parties.
I was skeptical about combining blueberry and bourbon with an IPL, I thought it would taste like a weird pancake beer, but wow, it's so balanced! The hops cut through the sweetness so nicely, it doesn't taste cloying at all. My roommate already stole half the batch to bring to his work happy hour.
Perfect for meal prep style batch drinks! I made a double batch two Sundays ago and it's held up perfectly in the growlers in my fridge, still tastes as fresh as day one. Great for grabbing a quick glass after work without having to mix anything, ideal for low-fuss weeknights.
Ugh, my first batch came out way too hoppy? I think I used the wrong IPA hop blend instead of the lighter IPL hops the recipe called for, it's so bitter it's hard to drink. Any tips for fixing it, or do I have to dump the whole batch?
Tried this for the first time last night, and wow, the bourbon barrel finish is so smooth! I did end up adding a tiny bit of lemon zest to brighten up the blueberry flavor, and it paired so well, I think I'm gonna keep that tweak for all future batches.
Just poured my first glass after letting it condition for 2 weeks and OH MY GOODNESS. It's even better than the blueberry bourbon beer I paid $18 a four pack for at the fancy bottle shop last month. Will absolutely be making this on repeat all fall.
Brought this to my homebrew club meetup last night and it won first place in the experimental lager category! The judges specifically called out how well the blueberry and bourbon notes integrated without overpowering the classic crisp IPL base. I can't take all the credit though, this recipe is foolproof.