Imperial Porter Craft Beer

title 1
Imperial Porter Craft Beer
⏱️ cook time 2 hours 30 minutes
🍽️ servings 10
⚡ Difficulty medium

intro

Deeply roasty, smooth imperial porter with rich dark chocolate, coffee, and subtle dried fruit notes, boasting a warming 7.5% ABV perfect for cozy winter sipping.

Ingredients

Pale liquid malt extract 1.2 kg
Chocolate malt (crushed) 120 g
Roasted barley (crushed) 60 g
Crystal malt 60L (crushed) 80 g
East Kent Goldings hops (bittering) 15 g
Fuggle hops (aroma) 10 g
London ale dry yeast (US-04) 11 g packet
Dark cocoa nibs 20 g
Corn sugar (priming) 30 g
No-rinse brewing sanitizer 15 ml

Steps

1

Sanitize Brewing Equipment

Mix 15ml no-rinse brewing sanitizer with 4L cool water in the 5-gallon stainless steel brew pot. Submerge the fermentation carboy, mash paddle, thermometer, siphon, airlock, mesh strainer, and ice tub for 2 minutes, then drain completely on the clean dark gray cotton towel. Ensure every surface that will touch cooled beer is fully sanitized to prevent off-flavors or infection; no sanitizer residue should remain on equipment after draining.

Step 1
step1:Sanitize Brewing Equipment
2

Steep Crushed Specialty Grains

Pour 3.8L (1 gallon) cool filtered water into the sanitized brew pot, heat to 68°C (155°F) over medium heat. Place crushed chocolate malt, roasted barley, and crystal malt into the fine mesh hop strainer, lower into the heated water, and steep for 30 minutes, holding temperature steady between 65-70°C (149-158°F). The water will turn a deep ruby-brown color as grain flavors and color extract. Remove the grain strainer after 30 minutes, let drain fully over the pot (do not squeeze the grains, as this adds harsh astringency).

Step 2
step2:Steep Crushed Specialty Grains
Step 2
step2:Steep Crushed Specialty Grains
3

Add Extract, Bring to Boil

Remove the pot from heat briefly, stir in the full 1.2kg of pale liquid malt extract with the slotted stainless steel mash paddle until fully dissolved, with no sticky clumps remaining. Return the pot to heat, bring to a gentle rolling boil, watching closely to prevent boilovers as wort foams when it reaches boiling temperature. Once a steady boil is reached, set a timer for 60 minutes of total boil time.

Step 3
step3:Add Extract, Bring to Boil
4

Add Hops on Schedule

When the 60-minute boil timer starts, add 15g of East Kent Goldings bittering hops directly to the boiling wort. At 55 minutes of boil (5 minutes remaining), add 10g of Fuggle aroma hops to the pot. Maintain a steady rolling boil, stirring occasionally with the mash paddle to prevent hops from sticking to the pot bottom. The wort will darken slightly and develop a rich, earthy hop aroma as it boils.

Step 4
step4:Add Hops on Schedule
Step 4
step4:Add Hops on Schedule
5

Chill Wort, Pitch Yeast

After the full 60-minute boil, remove the pot from heat. Place the covered pot into the sanitized clear plastic ice tub filled with ice water, set on the right side of the counter, to chill the wort rapidly to 21°C (70°F), approximately 25-30 minutes. Once cooled, pour the wort through the mesh strainer into the sanitized 1-gallon glass carboy to filter out hop debris. Sprinkle the full 11g packet of London ale yeast directly onto the wort surface, seal the carboy with a sanitized rubber stopper, and insert the water-filled 3-piece airlock.

Step 5
step5:Chill Wort, Pitch Yeast
Step 5
step5:Chill Wort, Pitch Yeast
6

Complete Primary Fermentation

Move the sealed carboy to a dark, temperature-stable space held at 18-20°C (65-68°F) for 7 days. Fermentation will start within 24-48 hours, visible as steady bubbles passing through the airlock. Wait until airlock bubbling slows to less than 1 bubble per minute, and the previously cloudy wort clears to a deep ebony color, with a thin layer of tan yeast sediment settled at the carboy bottom.

Step 6
step6:Complete Primary Fermentation
7

Add Nibs, Condition Beer

Sanitize the auto-siphon, then rack the clear beer off the yeast sediment into a temporary sanitized container to avoid disturbing the bottom yeast layer. Add 20g of sanitized dark cocoa nibs to the beer, re-seal the carboy with the airlock, and let condition for 10 additional days at 18°C (65°F) to absorb rich chocolate flavor and smooth out harsh young beer notes.

Step 7
step7:Add Nibs, Condition Beer
8

Bottle, Carbonate, Serve

Boil 30g corn sugar with 100ml water to make a priming sugar solution, mix gently into the conditioned beer to create natural carbonation. Use the sanitized auto-siphon to fill sanitized 12oz glass beer bottles, cap tightly, and store at room temperature for 2 weeks to build carbonation. Chill bottles for 24 hours before serving, pouring slowly into a thick nonic pint glass to showcase the dark beer and creamy tan head.

Step 8
step8:Bottle, Carbonate, Serve

Tips

1.Never squeeze steeped grain when removing it from wort: squeezing extracts harsh tannins from grain husks that create a dry, puckering astringent aftertaste; instead let grains drain fully by gravity for 2 minutes over the pot.
2.Hold fermentation temperature steady between 18-20°C (65-68°F): temperatures above 22°C (72°F) cause London ale yeast to produce solvent-like fruity off-flavors that overpower the porter's smooth chocolate and roast notes.
3.Sanitize every surface that touches cooled wort or beer: wild yeast and bacteria are ubiquitous on unwashed surfaces, and even a small amount can cause souring, mold, or off-flavors during the multi-week fermentation and conditioning process.

✨ You May Also Like

Drinks & Beverages
🍜 Mexico

A bright, balanced tequila-based cocktail with zesty fresh lime, smooth orange liqueur, and a signature salt rim, perfect for warm summer sipping.

⏱️ 5 minutesDrinks & Beverages ★ 4.9
Drinks & Beverages
🍜 United States

Thick, creamy, nostalgic classic vanilla milkshake with a rich, smooth texture, topped with whipped cream and a cherry for cool, sweet refreshment.

⏱️ 5 minutesDrinks & Beverages ★ 4.7
Drinks & Beverages
🍜 United States

A bright, golden strong ale with fruity banana-clove notes, subtle hop spice, and soft carbonation, brewed in classic Trappist Tripel tradition.

⏱️ 2 hours aDrinks & Beverages ★ 4.5
Drinks & Beverages
🍜 United States

A frothy, nostalgic American soda fountain treat pairing bubbly cold root beer with creamy vanilla ice cream, perfect for cooling down at warm weather gatherings.

⏱️ 20 minuteDrinks & Beverages ★ 4.8
Drinks & Beverages
🍜 United States

Tart, funky, effervescent American Wild Ale is a complex fruity craft beer brewed with wild yeast, delivering bright, zesty notes perfect for warm-weather sipping.

⏱️ 2 hours aDrinks & Beverages ★ 4.4
Drinks & Beverages
🍜 United States

Bright, bubbly copycat of the iconic American caramel cola, balanced with citrus and warm spice, perfect for sipping ice-cold on hot days.

⏱️ 15 minuteDrinks & Beverages ★ 4.8

Imperial Porter Craft Beer:Frequently Asked Questions

1.What core flavor notes and ABV can I expect from this imperial porter? ▾
You’ll get a deep, roasty base complemented by rich dark chocolate, smooth cold-brew-like coffee, and soft subtle dried fruit (think raisin or prune) on the finish. It clocks in at a warming 7.5% ABV with no harsh alcohol bite, making it perfectly balanced for slow, cozy winter sipping.
2.Do I need specialized all-grain brewing equipment to make this recipe? ▾
Nope! This recipe is built around pale liquid malt extract, so it works perfectly for home brewers with basic extract setups—no fancy mash tun required. You’ll only need a brew kettle, fermentation bucket, airlock, siphon, and standard bottling or kegging supplies to pull it off at home.
3.Why does the recipe call for crushed chocolate malt, roasted barley, and Crystal 60L malt? ▾
Those crushed specialty malts deliver that signature porter depth: chocolate malt adds rich dark cocoa notes, roasted barley brings a smooth, roasty coffee edge without acrid bitterness, and Crystal 60L contributes subtle dried fruit sweetness and a soft, round mouthfeel to balance the roast.
4.Can I use pre-crushed malts instead of crushing grain myself at home? ▾
Absolutely, as long as they’re freshly crushed within the last 2-3 weeks and stored airtight away from heat and light. Pre-crushed malts lose bright, nuanced flavor faster than whole grain, so skip bags that have sat open on store shelves for months to avoid flat, stale notes in your finished beer.
5.What role do East Kent Goldings hops play in this porter recipe? ▾
East Kent Goldings are used here as the dedicated bittering hop, added early in the boil to balance sweet malt and rich roast without loud citrus or pine hop flavor. They bring a soft, earthy, slightly floral bitter backbone that lets chocolate, coffee, and dried fruit notes take center stage.
6.How long does the total brewing process take from start to drinkable beer? ▾
Plan for about 4 weeks total, not counting optional aging time. You’ll spend 2-3 hours on brew day, 2 weeks of primary fermentation at 65-68°F, then 2 weeks of bottle conditioning at room temperature to build carbonation before you can chill and enjoy your first pour.
7.Will the 7.5% ABV make this porter taste harsh or overly boozy? ▾
Not if you follow proper fermentation practices! That 7.5% ABV is intentionally warming, not hot or solvent-like, because rich malt, chocolate, and roast notes balance the alcohol perfectly. Just ferment at a steady recommended temperature to avoid off-flavors that make high-ABV beer taste harsh.
8.Can I substitute East Kent Goldings if I don’t have them on hand? ▾
Yes, stick to other traditional English bittering hops for the closest match, like Fuggles or Willamette. Avoid bright, citrusy American hops like Cascade or Citra here—they’ll clash with the roasty, chocolatey profile and throw off the classic porter balance this recipe is designed for.
9.How do I avoid burnt, acrid flavors from the roasted barley and chocolate malt? ▾
Steep your crushed roasted barley and chocolate malt at 150-155°F for 20-30 minutes maximum, and never boil them for long stretches. Over-steeping or boiling dark roasted malts at high heat pulls out harsh, astringent compounds that taste like burnt coffee instead of smooth, rich roast.
10.What serving temperature brings out the best flavor in this imperial porter? ▾
Serve it between 50-55°F, a little warmer than standard light beer, to let the dark chocolate, coffee, and dried fruit notes fully shine. If you serve it ice cold, you’ll mute most of those nuanced flavors and only pick up sharp roasty bitter notes, which misses the point of this sippable porter.
11.Do I need to age this imperial porter after bottling, or can I drink it right away? ▾
It’s perfectly drinkable after 2 weeks of bottle conditioning, but it gets even better with 1-3 months of cool, dark cellaring at 55-60°F. Short aging smooths out lingering rough edges from roast and hops, and lets subtle dried fruit notes mellow and integrate more fully.
12.Can I add extra chocolate or coffee to amp up those signature flavor notes? ▾
Definitely! Add 2-4 oz of crushed, unsweetened cacao nibs during the last 5 minutes of the boil, or 4-6 oz of cold-brewed coffee right before bottling for an extra punch. Just don’t overdo it—too much extra coffee or cacao can tip the balance from rich to harshly bitter.
13.What type of yeast works best for this imperial porter recipe? ▾
Reach for a clean, reliable English ale yeast like Wyeast 1098, or US-05 dry American ale yeast if you want a slightly cleaner finish. It ferments steadily at 65-68°F, produces minimal distracting fruity off-notes, and lets the malt, roast, and hop character come through clearly.
14.What carbonation level is ideal for this imperial porter? ▾
Aim for moderate carbonation of about 2.0-2.2 volumes of CO2, whether you’re bottling with priming sugar or force-carbonating in a keg. Too much fizz will make roasty notes taste sharp, while flat carbonation will make the 7.5% ABV feel heavy and cloying on the palate.
15.What are the most common mistakes new brewers make with this recipe? ▾
First, don’t over-steep dark specialty malts, which causes dry, astringent off-flavors. Second, don’t let fermentation temperatures spike above 70°F, which creates harsh, solvent-like alcohol notes. Third, don’t rush bottle conditioning—give it the full 2 weeks to build carbonation and mellow flavors.
16.How long will this imperial porter stay fresh after bottling? ▾
Stored in a cool, dark place away from temperature swings, it will stay delicious for 6-8 months after bottling. Unlike hoppy IPAs that fade fast, the roasty, malty profile and slightly higher 7.5% ABV help it hold up well, though it won’t improve much past the 3-month aging mark.
17.What foods pair best with this rich imperial porter? ▾
Its roasty, chocolatey profile pairs perfectly with hearty winter fare: slow-smoked brisket, sharp aged cheddar, flourless chocolate cake, or spiced ginger cookies. The subtle dried fruit notes and smooth finish cut through rich, fatty foods and complement sweet, spiced desserts beautifully.

Comments (19)

2 days ago

Just finished racking this to secondary and OMG the wort smelled insane! Deep chocolate notes, a hint of coffee, that perfect roasted backbone I love in an imperial porter. Can’t wait to let it condition for a few weeks before cracking the first bottle. This recipe is so straightforward even for someone like me who only brews a couple batches a year!

3 days ago

Tried this last weekend and it turned out pretty good, but I was a little confused on the bittering hop addition timing—my batch came out a touch less bitter than I expected for an imperial porter. Did I misread the schedule? Flavor is still chef’s kiss though, my husband already asked when I’m making another batch for our fall bonfire.

2 days ago

So glad you enjoyed the flavor profile! If you want a touch more bitterness next time, add the bittering hops 10 minutes earlier in the boil to get that extra isomerization. It’s totally flexible depending on your taste preference too, so feel free to tweak to match what you love!

1 week ago

Game changer. I brought a growler of this to our weekly neighborhood potluck last weekend and people were begging for the recipe before I even left. The dark fruit notes from the roasted malt pair so well with smoked brisket, I’m not kidding. Zero off flavors, perfect ABV punch without tasting hot.

5 days ago

Wait I was at that potluck! That was YOUR porter? I had three cups, no joke. My partner kept making fun of me for hovering by the drink table lmao. Gonna try making this myself this weekend.

5 days ago

SO good. I love a rich imperial porter that doesn’t taste like thin roasted water, and this delivers. The 2.5 hour boil time is totally worth it for that deep, velvety mouthfeel. I added a tiny splash of vanilla bean at bottling and it elevated it to next level, highly recommend that hack if you love sweet porters.

2 weeks ago

Hmm, I think I messed something up here? The difficulty says medium but I struggled a little with the temperature control during the mash, my batch came out a little thinner than I wanted. Maybe it’s just my cheap equipment though? Flavor is decent, just not as thick as I hoped.

1 week ago

I had the same issue my first time making this! I fixed it by mashing 2 degrees higher than the recipe says next batch, it gave that full chewy mouthfeel I wanted. You don’t need fancy gear, just a cheap thermometer clip to hold your temp steady works.

5 days ago

Great tip from BrewGearGeek! Mashing at 154-156°F instead of 152 will absolutely give you that richer, thicker mouthfeel if that’s what you prefer. Don’t stress, even experienced brewers have temperature fluctuations sometimes, your batch will still taste great as it conditions!

yesterday

Brewed this for my fantasy football draft party and everyone lost their minds. Even my buddy who only drinks light lager went back for two pours! The chocolate-coffee finish is so smooth you almost forget it’s a higher ABV beer. Already planning a double batch for our tailgate next month.

2 hours ago

That’s the best compliment there is—winning over light lager drinkers is no easy feat! So stoked this was a hit at your draft party, a double batch for tailgates is 100% the right call.

30 minutes ago

Super solid porter recipe! I swapped the honey malt for a roasted barley variant to keep it 100% vegan and it turned out incredible. Great balance of bitter and sweet, no weird aftertaste. My only tiny note is I wish the recipe listed recommended yeast nutrient amounts more clearly, but I used my standard amount and it worked fine.

3 days ago

Wait y’all, this was my FIRST ever homebrew batch and it actually turned out??? I was so nervous I’d mess it up and waste all my ingredients, but the steps were super clear even for a total newbie. Just cracked my first test bottle after 2 weeks conditioning and it’s better than the $12 imperial porter I buy at the liquor store?!?

2 days ago

Congrats on your first batch! That’s such a good feeling when it turns out better than store bought. This recipe is perfect for new brewers because it’s forgiving even if you make tiny mistakes, I’ve recommended it to three people just getting into the hobby.

yesterday

This makes our day! There’s nothing better than hearing a first-time brewer nail a batch. Make sure you let it condition for another week or two, those chocolate and roasted flavors will smooth out even more and taste even better.

1 week ago

I make a spiced imperial porter every winter and this base recipe is my new go-to. I added a cinnamon stick and a pinch of orange peel during secondary and it tastes like Christmas in a glass. My adult kids came over for Sunday dinner and took half my bottles home with them, no joke.

5 days ago

Oh the orange peel addition sounds chef’s kiss! I was gonna add some cocoa nibs to my next batch but might throw a little orange peel in too, that combo with chocolate and roasted malt sounds unreal.

2 weeks ago

Great recipe, I just wish the ingredient list had more budget-friendly swap options? I had to splurge on a specialty malt I couldn’t find at my local homebrew shop, which pushed the cost per batch a little higher than I expected. Flavor is amazing though, don’t get me wrong, just a heads up for folks on a tight budget.

1 week ago

I swapped that fancy specialty malt for a little extra chocolate malt and a splash of cold brew coffee at bottling when I couldn’t find it locally, and you could barely tell the difference! Saves like $8 a batch, works perfectly.

5 days ago

Thanks for the feedback! We’ll add a section of budget-friendly swaps to the recipe card soon. The cold brew and extra chocolate malt swap ThriftyBrewDad mentioned is one of our go-to hacks if you can’t track down the specialty malt, it works beautifully.

5 days ago

Me and my golden retriever hung out in the garage while I brewed this last Saturday, and the whole space smelled like a fancy coffee shop for two days. The finished beer is so smooth, no harsh alcohol bite, perfect for sipping on the porch after a hike. 10/10 will be making this on repeat.

3 days ago

This is our ideal weekend vibe too—porch sips and post-hike beers are what homebrewing is all about! So glad you loved the recipe.

2 hours ago

Just did my first taste test after 3 weeks in the bottle and wow, this rivals the imperial porters from my favorite local brewery. The balance of roast, chocolate, and subtle hop bitterness is spot on. I was worried the 2.5 hour boil would be a drag but it went by fast with a good playlist and a snack. Worth every minute.

1 week ago

Taste is great, but the 2.5 hour cook/boil time was way longer than I expected on a weeknight! I started after work and didn’t finish cleaning up until almost 10pm, which was a bummer. Definitely save this one for a weekend brew day, y’all.

5 days ago

Oh hard same! I tried to squeeze this in after a late work meeting once and was rushing the whole time. Weekend brew days with this recipe are 100x more fun, no rush, you can sip a beer while you wait for the boil.

3 days ago

Great heads up for folks! We always recommend blocking off extra time for brew days, especially with longer boil recipes, so you don’t feel rushed. Weekend sessions with good company are definitely the way to go for this one.

yesterday

Brewed this to have on hand for our weekend Zelda marathon with the crew, and it was the perfect companion. Not too heavy, enough flavor to keep it interesting, smooth enough to sip for hours while we play. My roommate who swears he hates dark beer drank three bottles, lmao.

30 minutes ago

Wait this is such a good gaming beer idea! I’m tired of drinking seltzer during our game nights, this sounds way better. Adding this to my brew list for our next Mario Kart tournament.

2 days ago

I’ve been homebrewing for 22 years and this is one of the most solid imperial porter recipes I’ve come across. No fancy gimmicks, just straight forward, well balanced ingredients that produce a consistent, delicious beer every time. I’ve made it twice now and both batches came out identical, which is a win in my book.

3 days ago

Brought this to our annual fall block party potluck and it was the most talked about item there! People kept coming back to ask what it was, and I even had a neighbor offer to pay me for a six pack. The rich, roasty flavor pairs so good with chili and grilled sausages, it’s made for fall cookouts.

yesterday

We love hearing this! Imperial porter and chili is such an underrated combo, the roasted malt cuts through the spice of the chili perfectly. Your neighbor has great taste, haha!

2 weeks ago

I used gluten free malt extract to make this for my partner who has a gluten sensitivity, and it turned out so well! I was worried the flavor would be off, but you honestly can’t tell the difference from a regular grain batch. Only reason it’s not 5 stars is I wish the recipe had notes for GF adaptations, but I figured it out as I went.

1 week ago

I did the same thing with GF malt last month and added a little extra roasted rice hulls to help with lautering, it came out perfect. My celiac best friend could drink it without any issues, which was such a win.

5 days ago

Thanks so much for sharing your GF adaptation! We’ll be sure to add notes for gluten free adjustments to the recipe soon, so more folks can enjoy this porter regardless of dietary restrictions.

just now

Just wrapped up bottling my second batch of this and I can already tell it’s gonna be even better than the first. I added a couple ounces of cacao nibs soaked in bourbon to secondary this time and the sample I took was unreal. Perfect cold weather sipper for after rides this fall.

5 minutes ago

My spouse and I made this for our first at-home date night after the honeymoon, and it was so much fun! We were a little messy and spilled a tiny bit of wort on the counter, but the end result is already smelling amazing even though it’s still fermenting. Can’t wait to toast our first batch on our one month anniversary.

just now

This is such a sweet date night idea! Brewing together is such a fun shared activity, and that first toast when the beer is ready will be such a special memory. Congrats on the marriage, too!