Jasmine Bourbon Barrel Aged IPL
intro
Crisp, hoppy India Pale Lager infused with jasmine blossoms and aged on bourbon-soaked oak, with bright floral notes, warm vanilla undertones, and a clean, dry, cold-sippable finish.
Ingredients
Steps
Sanitize Brewing Gear
Wash all brewing tools (2-gallon brew pot, stirring spoon, thermometer, strainer, fermentation jug, siphon, bottles) with warm soapy water, then rinse and soak in food-grade no-rinse brewer sanitizer for 2 minutes. Ensure every surface that will touch wort or beer is fully sanitized to prevent off-flavors or contamination. Air dry on the clean counter for 5 minutes before use.
Steep Malt for Wort
Pour 1 gallon of filtered water into the 2-gallon stainless steel brew pot, clip the digital thermometer to the pot side, and heat water to 155°F (68°C). Add the crushed pale 2-row lager malt, stir gently with the long stainless steel spoon to break up clumps, hold temperature steady at 150-155°F for 30 minutes. The liquid will turn a pale straw-gold color and smell of sweet, bready grain. After 30 minutes, remove the grain, letting all liquid drain back into the pot (do not squeeze the grain, which adds harsh tannins).
Boil and Add Hops
Bring the strained wort to a rolling, gentle boil (212°F/100°C at sea level). Once boiling, add 0.6 oz of Cascade hop pellets (bittering addition) and 1 tsp yeast nutrient, set a timer for 45 minutes. Maintain a steady, non-overflowing boil, stirring occasionally. With 5 minutes left on the boil timer, add 0.2 oz of Cascade hops for aroma. At the very end of the boil (flameout), add half the dried jasmine blossoms (0.25 oz), stir once, then turn off heat.
Cool and Strain Wort
Place the lidded brew pot in an ice bath until the wort cools to 65°F (18°C), approximately 20 minutes, avoiding unnecessary lid removal to prevent contamination. Once cooled, pour the wort through the fine-mesh stainless steel strainer into the 1-gallon clear glass fermentation jug, top up to the 1-gallon etched mark with remaining cold filtered water if needed. The finished wort should be pale gold, slightly hazy, free of large hop or grain particles.
Pitch Lager Yeast
Sprinkle the entire packet of dry lager yeast evenly over the surface of the cooled wort in the fermentation jug. Seal the jug with an airlock filled halfway with sanitizer, store in a dark, temperature-controlled space at 55°F (13°C) for 2 weeks of primary fermentation. You will see bubbles rising through the airlock within 24-48 hours, indicating active fermentation; wait until bubbling stops completely before moving to the next step.
Condition with Oak and Jasmine
After 2 weeks of primary fermentation, when bubbling in the airlock has stopped, sanitize the oak chips (pre-soaked in 2oz bourbon for 3 days, drained) and remaining 0.25 oz dried jasmine blossoms. Add both directly to the fermentation jug, re-seal the airlock, and let condition for 1 additional week at 55°F (13°C). This step extracts soft vanilla, caramel bourbon notes from the oak and bright, perfumed jasmine aroma without overpowering the crisp lager base.
Bottle for Carbonation
After 1 week of conditioning, sanitize the auto-siphon, 8 amber 12oz glass bottles, and bottle capper. Dissolve 1oz corn sugar in 2oz boiling water, cool, and add to a clean sanitized bottling bucket. Siphon the beer from the fermentation jug into the bottling bucket, taking care not to disturb the yeast sediment at the bottom of the jug, to mix evenly with the priming sugar. Fill each bottle to 1 inch below the rim, crimp crown caps on with the matte black bottle capper, and store bottles upright in a dark 65°F (18°C) space for 2 weeks to carbonate naturally.
Chill and Serve Cold
After 2 weeks of room-temperature bottle carbonation, chill the beer for 48 hours at 38°F (3°C) before serving. Pour slowly into the tall clear pilsner glass, leaving the last 1/4 inch of yeast sediment in the bottle to keep the beer clear. Top with a single fresh jasmine blossom on the foam if desired, and serve immediately while cold.
Tips
2.Use oak chips instead of straight bourbon: soaking medium-toast oak chips in bourbon for 3 days infuses the wood with warm vanilla, caramel, and bourbon notes without adding harsh raw alcohol flavor. Always drain the chips before adding to beer to avoid overpowering the crisp lager base.
3.Keep fermentation temperatures cool and consistent: lager yeast performs best at 52-55°F (11-13°C); fermenting above 60°F (15°C) produces fruity, solvent-like off-flavors that clash with the soft jasmine and smooth oak notes. A small temperature-controlled mini fridge is ideal for 1-gallon batches.

OMG, I brewed this back in June and tapped the keg for our Labor Day block party and people would NOT leave my kegerator alone! The jasmine is so bright and floral without tasting like perfume, and the bourbon barrel notes add this warm, cozy depth that pairs so well with the crisp IPL hop bite. My 12 year old had a blast helping me measure out the jasmine tea and sanitize all the equipment, it was such a fun weekend project. Total game changer for homebrew nights, I’m already planning a second batch!
Just finished brewing this yesterday, it’s my third ever homebrew batch! I was worried the jasmine would be overpowering because I accidentally added it 5 minutes earlier than the recipe said, but the sample I took before pitching yeast smelled amazing. Fingers crossed it turns out, will update once it’s carbonated!
SO good. I brought a growler of this to my friend’s fall potluck last weekend and every single person asked where I bought it. When I said I made it myself people were shocked. The jasmine cuts through the rich bourbon flavor so nicely, it’s not too heavy like a lot of barrel aged beers. 10/10 will make again.
Wait, has anyone tried swapping the jasmine for another floral? I’m not a huge jasmine fan but I love the sound of the bourbon barrel IPL base. Thinking maybe elderflower?
Bummer, my first batch came out way more bitter than I expected. Did I overdo the hops? I followed the hop schedule exactly but maybe my boil was too hot? The jasmine and bourbon flavors are there but the bitterness is overwhelming. Any tips?
Made this for my boyfriend’s birthday and he was obsessed. We’re both huge jasmine tea fans so this was right up our alley. The bourbon finish is so smooth, you can tell it’s barrel aged without it tasting like straight liquor. Will be a regular in our brew rotation.
I don’t have space for a 5 gallon barrel right now – do I really need to do the barrel aging step? Can I just add bourbon directly if I want that flavor?
Paired this with spicy garlic fried chicken at my family dinner last Sunday and *chefs kiss*. The crisp, floral lager cuts through the spice so perfectly, my cousin who only drinks cheap light lager had three glasses. 10/10 pairing, don’t sleep on serving this with bold, spicy food!
Forgot to add the jasmine until flame out because I got distracted by my dog barking at the mailman, and it still turned out incredible. The jasmine is more subtle than I expected but that’s not a bad thing at all. Super forgiving recipe for a distracted brewer like me!
Can I use a regular ale yeast for this if I don’t have lager yeast on hand? I know it’s an IPL but my fermentation chamber can hold ale temps easily, I don’t wanna wait for a lager order to come in.
Wait, has anyone tried making a non-alcoholic version of this? My teens love trying fancy craft sodas and the jasmine + bourbon vanilla sounds like it would make an amazing NA soda, I just don’t know how to adapt the recipe!
This recipe converted my friend who swears he hates all hoppy beer. He drank half a growler and asked if I could make him a whole batch for his wedding next spring. The jasmine softens the hops so much and the bourbon notes feel fancy without being pretentious. 100% worth the medium effort, don’t be intimidated if you’re a newer brewer!
Wait, the recipe says total cook time is 1 hour 15 minutes – is that just the boil, or does that include cooling and transferring to the fermenter? I’m trying to plan my brew day around my kid’s soccer game so I don’t miss kickoff!
Added a handful of dried lavender along with the jasmine in my second batch and it’s literal magic. Tastes like a summer evening in a glass, so floral and smooth with that little bourbon kick on the finish. Don’t be afraid to experiment a little with this base, it’s super versatile!
How long do you usually let this condition after kegging? I’m trying to time it for our Halloween party and I don’t wanna tap it too early before the flavors meld together.
I was nervous to try this because medium difficulty recipes usually stress me out, but the step-by-step instructions were so clear! The only thing I messed up was I spilled a tiny bit of wort when I was transferring to the fermenter, but it still turned out amazing. My whole book club loved it when I brought samples last week!
I used loose leaf jasmine green tea instead of the dried jasmine flowers the recipe calls for because that’s all I had at the grocery store. Should I be worried about it making the beer taste too grassy or green-tea-y? It’s still fermenting right now.
Meal prepped this on Sunday along with my usual weekly lunches, and having a cold glass waiting for me after work every night this week has been the best little treat. It’s so crisp and flavorful, way better than any store bought IPL I’ve tried. Will be a regular on my brew schedule for sure!
Wait, this is my first time hearing of a jasmine IPL! I’ve had floral beers before that tasted like bath soap and I’m scared to waste ingredients. Does the jasmine come through too strong?