Lavender Bourbon Barrel Aged IPL

title 1
Lavender Bourbon Barrel Aged IPL
⏱️ cook time 1 hour wort boil + 28 days fermentation & conditioning
🍽️ servings 8
⚡ Difficulty medium

intro

Crisp, hoppy India Pale Lager aged on bourbon-soaked oak with subtle floral lavender, balancing bright citrus hops, warm vanilla, and soft aromatic notes for a smooth cold craft brew.

Ingredients

Light pilsner liquid malt extract 1.3kg
Cascade hop pellets 15g (10g bittering, 5g aroma)
Food-grade dried culinary lavender buds 2g
Medium-char bourbon barrel oak stave 1 piece (20cm long)
80-proof straight bourbon 60ml
Dry lager yeast (W-34/70 strain) 1 packet (5g)
Gypsum (brewing salt) 1 tsp
Cold filtered water 4L
Corn sugar (for bottle carbonation) 40g

Steps

1

Sanitize Brewing Gear

Fill the 6-quart sanitizer bucket with food-grade no-rinse brewer's sanitizer mixed per package directions. Submerge the stock pot, stirring spoon, thermometer, strainer, funnel, airlock, and mason jar for 2 full minutes, then remove and air dry on the clean counter. No visible sanitizer residue should remain on surfaces; proper sanitization is the most critical step to prevent off-flavors and spoiled batches.

Step 1
step1:Sanitize Brewing Gear
2

Steep Oak in Bourbon

Place the charred bourbon barrel oak stave and 2g dried culinary lavender buds into the 250ml mason jar, pour the 60ml bourbon over top, and seal tightly with the silver lid. Let steep for 48 hours at room temperature out of direct sunlight, until the bourbon takes on a deep amber color from charred oak compounds and faint lavender notes. Complete this step 2 days before brew day to reduce active work time.

Step 2
step2:Steep Oak in Bourbon
Step 2
step2:Steep Oak in Bourbon
3

Boil the Wort Base

Pour 3L of cold filtered water into the sanitized 8-quart stock pot, stir in 1 tsp gypsum and the full 1.3kg pilsner liquid malt extract, stirring constantly with the slotted steel spoon until fully dissolved with no sticky clumps at the pot bottom. Clip the digital thermometer to the pot rim, bring the mixture to a gentle rolling boil at 100C/212F, and hold at a steady boil for 60 minutes, adjusting heat to avoid sticky boilovers. The finished wort will smell sweet and bready, with a pale clear golden color.

Step 3
step3:Boil the Wort Base
4

Add Hops in Stages

Once the wort has been boiling for 45 minutes, add 10g of Cascade hop pellets directly to the boil for clean, balanced bittering, stirring gently to incorporate and prevent clumping. When the full 60 minute boil is complete, turn off the heat, add the remaining 5g of Cascade hop pellets for bright citrusy, piney aroma, and stir once. Let the hops steep for 10 minutes off heat, until green hop particles are visibly suspended throughout the wort.

Step 4
step4:Add Hops in Stages
Step 4
step4:Add Hops in Stages
5

Cool and Transfer Wort

Cover the stock pot with its lid and cool the wort as quickly as possible to 21C/70F by setting the pot in a sink of ice water, swirling gently every 5 minutes until the target temperature is reached. Return the pot to the counter, place the silicone funnel in the neck of the 1-gallon glass carboy, set the fine mesh strainer over the funnel, and pour the cooled wort through the strainer into the carboy to filter out large hop particles. Top up the carboy with the remaining 1L of cold filtered water to reach the 3.8L/1 gallon etched volume mark, then swirl gently to fully mix.

Step 5
step5:Cool and Transfer Wort
6

Pitch Yeast for Fermentation

Sprinkle the full 5g packet of dry lager yeast evenly across the surface of the cooled wort in the carboy; do not stir initially, as the yeast will rehydrate naturally on the wort surface. Fit the sanitized clear airlock (half filled with sanitizer solution) into the carboy neck, and move the carboy to a dark, temperature-stable space held at 13C/55F for 2 weeks of primary fermentation. Steady bubbles will appear in the airlock within 24-48 hours, signaling active, healthy fermentation.

Step 6
step6:Pitch Yeast for Fermentation
7

Add Oak and Lavender

After 2 weeks of primary fermentation, when airlock bubbling slows to less than 1 bubble per minute, sanitize the outside of the steeped mason jar. Pour the full contents (bourbon, oak stave, and lavender buds) through the sanitized strainer into the carboy, then reseal the airlock. Let the beer condition for an additional 2 weeks at 13C/55F, allowing warm bourbon, vanilla oak, and soft lavender notes to integrate fully without overpowering the bright Cascade hop character.

Step 7
step7:Add Oak and Lavender
8

Bottle for Carbonation

After 2 weeks of conditioning on oak and lavender, siphon the now clear, brilliant golden beer into sanitized 350ml glass bottles using the auto-siphon, adding 1 tsp of corn sugar to each bottle to create natural carbonation. Seal bottles tightly with crown caps, and let condition at room temperature (20C/68F) for 1 week to build smooth, fine carbonation, then chill to 4C/39F for 24 hours before serving.

Step 8
step8:Bottle for Carbonation

Tips

1.Only use food-grade culinary lavender for this recipe: decorative craft lavender is often treated with preservatives or artificial fragrances that create a harsh, soapy, perfume-like flavor. Stick to the 2g measurement per gallon — overadding lavender is the most common mistake, and will make your beer taste like hand soap instead of soft floral refreshment.
2.If you cannot source a full bourbon barrel stave, substitute 30g of medium-toast bourbon barrel cubes, and soak them in the 60ml of bourbon for the full 48 hours. This delivers the same vanilla, caramel, and warm oak notes as full barrel aging, without the high cost or large space required for a full wooden barrel.
3.Maintain a steady 55F/13C fermentation temperature for the lager yeast: fluctuating or too-warm temperatures will produce fruity, solvent-like off-flavors that clash with the delicate lavender and smooth bourbon notes. A cool basement or temperature-controlled fermentation fridge works perfectly for this.

✨ You May Also Like

Drinks & Beverages
🍜 Mexico

A bright, balanced tequila-based cocktail with zesty fresh lime, smooth orange liqueur, and a signature salt rim, perfect for warm summer sipping.

⏱️ 5 minutesDrinks & Beverages ★ 4.9
Drinks & Beverages
🍜 United States

Thick, creamy, nostalgic classic vanilla milkshake with a rich, smooth texture, topped with whipped cream and a cherry for cool, sweet refreshment.

⏱️ 5 minutesDrinks & Beverages ★ 4.7
Drinks & Beverages
🍜 United States

A bright, golden strong ale with fruity banana-clove notes, subtle hop spice, and soft carbonation, brewed in classic Trappist Tripel tradition.

⏱️ 2 hours aDrinks & Beverages ★ 4.5
Drinks & Beverages
🍜 United States

A frothy, nostalgic American soda fountain treat pairing bubbly cold root beer with creamy vanilla ice cream, perfect for cooling down at warm weather gatherings.

⏱️ 20 minuteDrinks & Beverages ★ 4.8
Drinks & Beverages
🍜 United States

Tart, funky, effervescent American Wild Ale is a complex fruity craft beer brewed with wild yeast, delivering bright, zesty notes perfect for warm-weather sipping.

⏱️ 2 hours aDrinks & Beverages ★ 4.4
Drinks & Beverages
🍜 United States

Bright, bubbly copycat of the iconic American caramel cola, balanced with citrus and warm spice, perfect for sipping ice-cold on hot days.

⏱️ 15 minuteDrinks & Beverages ★ 4.8

Lavender Bourbon Barrel Aged IPL:Frequently Asked Questions

1.How long should I age this IPL on the bourbon-soaked oak and lavender to get the best flavor balance? ▾
Aim for 2–3 weeks of cold conditioning at 35–40°F once primary fermentation finishes. Pull a small 2-oz sample to taste every 3 days starting at week 2, and remove the oak and lavender as soon as you pick up soft vanilla, subtle bourbon warmth, and faint floral notes, before lavender turns soapy or oak gets overly tannic.
2.Can I use fresh lavender from my garden instead of dried culinary lavender buds? ▾
Stick to food-grade dried culinary lavender for the most consistent, balanced results. Fresh lavender has highly variable moisture and volatile oil levels that can easily add grassy, bitter, or overpowering soapy notes. If you do use homegrown fresh lavender, use 1/3 the called-for dried amount, and confirm it’s completely unsprayed before adding.
3.Do I have to use 80-proof straight bourbon, or can I swap in a different bourbon style? ▾
80-proof straight bourbon delivers the ideal warm caramel, vanilla, and subtle oak backbone without harsh, boozy heat. Lower-proof bourbon won’t pull enough flavor from the oak stave, while flavored bourbons (like honey or cinnamon) will overpower the delicate lavender and bright Cascade hop citrus that make this IPL work.
4.How do I properly prep the medium-char bourbon barrel oak stave before adding it to my fermenter? ▾
Start by sanitizing the stave with a 48-hour soak in a sealed jar, using just enough 80-proof bourbon to fully submerge it. Save the leftover bourbon after soaking—you can stir in small splashes to taste during conditioning if you want extra bourbon warmth, rather than dumping it all in and making the brew too boozy.
5.What makes this an IPL instead of an IPA, and how does that change the brew? ▾
IPL stands for India Pale Lager, which uses clean, cold-fermenting lager yeast instead of the warmer-fermenting ale yeast used for IPAs. That gives this recipe its signature crisp, smooth finish that lets bright Cascade citrus, soft lavender, and warm bourbon oak shine without the fruity, estery edge common to most IPAs.
6.What happens if I leave the lavender in contact with the beer for too long? ▾
Over-steeping lavender is the most common misstep with this recipe. After 3+ weeks of contact, lavender leaches bitter, soapy, perfumed compounds that completely throw off the balance of hops, oak, and bourbon. If you accidentally over-steep, mellow the soapy note with 2 extra weeks of cold conditioning and a tiny pinch of food-grade calcium carbonate to soften harsh flavors.
7.Can I brew this as an all-grain batch instead of using light pilsner liquid malt extract? ▾
Absolutely! Swap the light pilsner liquid malt extract for 9 lbs of domestic 2-row pilsner malt, mashed at 150°F for 60 minutes to get the same crisp, light malt base that lets the hops, lavender, and oak take center stage. Keep all hop, lavender, oak, and bourbon measurements identical to the extract recipe for consistent, reliable flavor.
8.What’s the best way to add Cascade hops to get bright citrus without harsh bitterness? ▾
Add 70% of your Cascade hops during the last 10 minutes of the boil, plus a 3-day dry hop addition right after primary fermentation wraps, before you add the oak and lavender. This schedule prioritizes bright grapefruit and lemon citrus aroma over sharp, astringent bitterness that would clash with the soft vanilla and floral lavender notes.
9.How much bourbon is too much? I don’t want this to taste like a straight bourbon cocktail. ▾
You only need the 4–6 oz of bourbon used to soak the oak stave for a standard 5-gallon batch to get that subtle, warm barrel character. Resist pouring extra bourbon straight into the fermenter—if you want more bourbon flavor, add 1 oz increments of the reserved stave-soak bourbon, tasting after each addition, until you hit a soft, background warmth.
10.Can I reuse the bourbon-soaked oak stave for another batch of homebrew later? ▾
You can reuse the stave for one more light-bodied beer batch, but expect about 50% less oak and bourbon character the second time around. Before reusing, re-sanitize it with a fresh 24-hour soak in 2 oz of bourbon, and taste your aging beer more frequently, since flavor extraction will be slower and milder than with a new stave.
11.What serving temperature and glassware works best for this lavender bourbon IPL? ▾
Serve this brew cold, at 40–45°F, in a tulip or wide-mouth IPA glass to trap the delicate lavender and Cascade hop aromas as you sip. Avoid serving it ice-cold straight from the back of the fridge, because frigid temperatures will mute the soft vanilla and floral notes and make the bourbon warmth taste harsh and unbalanced.
12.How do I avoid getting that weird medicinal, perfume-like flavor people sometimes get with lavender beer? ▾
First, make sure you’re using culinary-grade dried lavender, not craft store lavender meant for potpourri, which is often treated with artificial fragrances and not food-safe. Stick to the recommended 0.25 oz per 5-gallon batch, add it only during cold conditioning, and pull it as soon as you pick up a soft floral note, not a strong perfume scent.
13.How long will the finished IPL stay fresh and flavorful after I bottle or keg it? ▾
When stored cold in a sealed keg or properly carbonated bottle away from direct sunlight, this IPL will stay balanced and flavorful for 3–4 months. The oak and bourbon notes will mellow slightly over time, while the lavender and Cascade hop citrus will fade fastest, so aim to drink most of your batch within the first 3 months for peak flavor.
14.What carbonation level is ideal to keep this brew smooth instead of overly fizzy? ▾
Aim for a carbonation level of 2.3–2.5 volumes of CO2, which is slightly fizzier than a standard lager but less bubbly than a hazy IPA. This level gives the beer a crisp, refreshing tingle that lifts the citrus hop and lavender aromas without making the oak and bourbon notes taste thin or washed out by excessive fizz.
15.I don’t have a full bourbon barrel oak stave—can I use oak chips or cubes instead? ▾
Yes, you can substitute medium-char oak cubes or chips, but adjust the quantity and contact time to avoid over-oaking. Use 1 oz of medium-char oak cubes (soaked the same way in bourbon) for 1–2 weeks of contact time, or 0.5 oz of oak chips for 3–5 days, since smaller oak pieces extract flavor much faster than a solid stave.

Comments (10)

2 weeks ago

Just tapped my first batch of this last night and WOW. SO good. The 28 day conditioning time is no joke, don’t rush it! I used a used bourbon barrel from a local distillery near me and the depth of flavor is insane. My wife who usually hates IPAs even had two glasses with dinner.

1 week ago

Did you soak the barrel with anything before adding the wort? I’ve had issues with mold on used barrels in the past and don’t want to mess this recipe up!

5 days ago

Great tip about not rushing the conditioning time! For used barrels, we recommend doing a quick citric acid rinse and sulfur burn before filling to kill off any unwanted mold or bacteria, that’ll save your batch for sure.

1 week ago

Just cracked open my first bottle after the full 28 days and I’m obsessed! I was worried my tiny Brooklyn apartment would be too warm for fermentation but I kept my temp controller set to the recommended range and it turned out perfectly. My roommate said it tastes like a fancy craft cocktail, not a homebrew.

3 days ago

Oh thank god I’m not the only one brewing in a tiny city apartment! What temp controller do you use? I’ve been shopping for one and don’t want to waste money on a dud.

2 days ago

So glad the temp control tip worked out for you! For folks brewing in small spaces, a simple plug-in temp controller paired with a mini fridge works perfectly to keep fermentation temps steady, no fancy equipment needed.

5 days ago

Took a chance on this for my neighborhood block party and it was a total hit! The only thing I adjusted was adding a tiny bit more caramel malt to give it a little deeper color, but otherwise followed the recipe exactly. Kids were running around, adults were all gathered around the keg asking where I got the recipe — chef’s kiss.

2 days ago

How much did this recipe yield? I need to make enough for 30 people at my upcoming block party and don’t want to run out halfway through!

3 days ago

Wait, I was super nervous about the lavender level here—last time I tried a lavender beer it tasted like I was drinking potpourri. Has anyone dialed back the lavender a little and still had it turn out well? I want to make this for my sister’s backyard BBQ next month.

2 days ago

Great question! If you’re worried about the lavender being too strong, you can cut the dried lavender amount by 25% and add it during the last 5 minutes of the boil instead of steep post-ferment. It’ll still give that soft floral note without the soapy/potpourri vibe you’re worried about — perfect for a BBQ!

2 days ago

OMG this recipe is an absolute game changer! I brought a growler of this to our weekend camping trip with friends and everyone was begging for the recipe. The lavender is so subtle it doesn’t taste like soap, and the bourbon barrel notes hit just right at the finish. 10/10 will brew again for our fall potluck!

yesterday

Game. Changer. I brought a six pack of this to my office potluck last week and people are still talking about it. The balance between the hoppy IPL bite, smooth bourbon warmth, and soft lavender is unlike any store bought beer I’ve ever had. Already planning my second batch to have ready for holiday parties.

2 hours ago

First time doing a barrel aged brew ever and I’m low-key panicking a little? The wort boil went fine, I pitched the yeast, but I’m worried I messed up the lavender addition timing. Anyone else mess that up on their first try and still have a drinkable batch?

30 minutes ago

I accidentally added my lavender 10 minutes too early on my first batch of this and it still turned out great! It was a little more floral than intended but none of my friends complained, we finished the whole keg in two weekends.

5 minutes ago

No need to panic! Small timing missteps on the lavender won’t ruin your batch. If you added it too early, just give it an extra 3-5 days of conditioning time to let those sharp floral notes mellow out, it’ll be delicious.

30 minutes ago

Wait, has anyone tried making this without the barrel aging? I don’t have a spare barrel lying around and I’m wondering if bourbon soaked oak chips would be a good substitute? I really want to try the flavor combo but don’t want to drop cash on a whole barrel for one batch.

5 minutes ago

Great question! You absolutely can get a very similar flavor profile by using 2oz of medium toast oak chips soaked in 4oz of good quality bourbon for 3 days, then adding them to your secondary fermenter. It’s a budget-friendly swap that tastes almost identical to the barrel aged version!

5 minutes ago

I’ll admit I was skeptical about lavender in an IPL, but this recipe converted me. The flavors don’t compete at all — the hops cut the sweetness of the bourbon, the lavender adds that soft little afternote, it’s just perfectly balanced. My only regret is not making a double batch, because my brother-in-law stole half my bottles when he came over for Sunday football.

just now

Hahaha that’s such a brother-in-law move! I’m making this for our fantasy football draft party next month, definitely hiding half the batch from my own BIL so I actually get to try some.

just now

Made this for our annual family dinner to celebrate my dad’s birthday — he’s a huge bourbon fan and he absolutely loved it! I will say this is definitely medium difficulty like the recipe says, don’t go into it if you’re brand new to brewing without reading through all the steps twice. Worth every minute of wait time though.