Oat IPA
intro
Smooth, hazy, citrus-forward Oat IPA with creamy mouthfeel, bright tropical hop aroma, and subtle malt sweetness, perfect for cold summer sipping at cookouts.
Ingredients
Steps
Sanitize Brewing Gear
Mix 1 tablespoon no-rinse brewing sanitizer with 4L cool water in the 5-gallon sanitizing bucket. Submerge the brew pot, mash spoon, thermometer, strainer, fermentation jug, funnel, siphon, and bottles for 2 minutes, then remove and air dry on the clean counter. No residual sanitizer suds should be visible when dry; this prevents off-flavors and bacterial contamination.
Mash Grain Mixture
Add 2.5L filtered water to the 1-gallon stainless steel brew pot, drop in 1 Campden tablet to remove chlorine, then heat to 152°F (67°C) on the stovetop. Slowly stir in the crushed pale 2-row malt, flaked oats, carapils malt, and crystal 15L malt, stirring with the slotted mash spoon to eliminate dry clumps. Clip the digital thermometer to the pot side, hold the temperature steady at 150-155°F (66-68°C) for 60 minutes, covering the pot with a lid to retain heat. The grain mixture will thicken to a porridge-like consistency as starches convert to fermentable sugar.
Strain Sweet Wort
After the 60-minute mash, place the fine-mesh stainless steel strainer over the top of the sanitized 1-gallon fermentation jug (set temporarily on the counter). Slowly pour the hot grain mash through the strainer, collecting the sweet, amber liquid (called wort) in the jug. Pour 1L of 170°F (77°C) filtered water over the spent grains in the strainer to rinse residual sugar, collecting all runoff in the jug. Discard the spent grain once fully drained.
Boil Wort and Add Hops
Pour the collected strained wort back into the clean stainless steel brew pot, bring to a gentle rolling boil over medium heat, maintaining the boil for 60 minutes total. At the start of the boil, add 10g Cascade hop pellets (bittering addition). With 15 minutes left in the boil, add 5g Citra hop pellets (flavor addition). With 1 minute left in the boil, add the remaining 5g Cascade, 5g Citra, and 5g Mosaic hop pellets (aroma addition). Watch for boil-overs, adjusting heat as needed to keep the boil steady but not violent.
Cool and Pitch Yeast
After the 60-minute boil, remove the pot from heat and place it in a sink filled with ice water to cool the wort rapidly to 70°F (21°C), which takes roughly 15 minutes. Once cooled, pour the wort through the fine-mesh strainer and stainless steel funnel into the sanitized 1-gallon glass fermentation jug, topping up with filtered water to reach the 1-gallon mark. Sprinkle the full 5g packet of dry US-05 ale yeast over the wort surface, then seal the jug with a sanitized airlock filled halfway with water. Store the jug in a dark, 65-70°F (18-21°C) spot for 7 days to ferment; fermentation is complete when no bubbles rise through the airlock for 24 consecutive hours.
Bottle Condition IPA
After 7 days of primary fermentation, when bubbling in the airlock has stopped completely, sanitize the siphon, bottles, and crown caps. Boil 30g corn sugar in 100ml water for 5 minutes to make priming sugar, pour into the bottom of a sanitized mixing container, then siphon the fermented beer onto the priming sugar, stirring gently to distribute evenly. Siphon the beer into the 8 amber 12oz bottles, leaving 2.5cm of headspace at the top of each bottle, then crimp crown caps onto each bottle using the matte black bottle capper. Store bottles in the same dark 65-70°F spot for 7 more days to carbonate naturally.
Chill and Serve
After 7 days of bottle conditioning, place the Oat IPA bottles in the refrigerator to chill for at least 24 hours before serving. When ready to pour, tilt the clear tulip beer glass at a 45-degree angle, pour slowly to build a 2cm thick foam head, then straighten the glass as you finish pouring. The finished beer will be hazy golden-amber, with bright citrus and tropical fruit aroma, creamy smooth mouthfeel from the flaked oats, and balanced bitter finish.
Tips
2.Hold mash temperature strictly between 150-155°F (66-68°C): temperatures above 160°F will denature the enzymes that convert grain starch to sugar, resulting in thin, low-alcohol beer, while temperatures below 148°F will create a dry, thin mouthfeel missing the signature creamy oat texture.
3.Leave the last 10ml of beer in each bottle when pouring: this avoids disturbing the thin layer of settled yeast sediment at the bottle bottom, keeping your poured Oat IPA smooth, hazy, and bright without any yeasty, bready off-notes. Chill bottles for a full 24 hours before serving to help sediment settle tightly.

OMG this Creamy Hazy Oat IPA is an absolute game changer! I brought a batch to our neighborhood potluck last weekend and everyone was begging for the recipe. The oat gives it that perfect silky mouthfeel, zero harsh bitter aftertaste you get from some store-bought hazy IPAs. 10/10, will be brewing this monthly from now on.
Was nervous to try brewing beer at home since I've only ever done meal prep and regular family dinner recipes, but this was way more approachable than I thought! My husband and his craft beer obsessed friends were raving about it at our July cookout. The creaminess from the oats is chef's kiss, SO good.
Solid base recipe, but I found the 1 hour 15 minute timeline a little tight for my setup — I added an extra 10 minutes to the mash step and it came out perfect. Wish there was a note about adjusting for smaller stovetop setups, but otherwise the flavor is spot on, exactly that juicy, hazy vibe I love.
Brewed this for our annual family camping trip and even my cousin who swears he 'hates IPAs' went back for three glasses! The creamy, smooth finish doesn't hit you over the head with hops, it's so drinkable. Only thing I messed up was forgetting to chill it fast enough the first time, oops. Second batch was flawless though.
Pro tip for anyone on a budget: I grabbed all the grain and hops from my local homebrew shop's bulk bin and it cut the cost of the batch almost in half! Turned out exactly as described, super creamy, perfect hazy golden color. Way cheaper than buying 4 packs of fancy hazy IPA at the liquor store, total game changer for real.
Went into this as a total newbie who has never brewed anything before, medium difficulty scared me a little but the step by step instructions were so easy to follow! My first batch is carbonating right now, I snuck a tiny taste and it already tastes better than most of the IPAs I buy at the bar near my apartment.
I added a tiny bit of orange zest during the last 5 minutes of the boil and it took this to the NEXT level. Tastes like a creamsicle hazy IPA, perfect for sipping by the pool in this Florida heat. My roommates are already asking when I'm making the next batch.