Robust Porter
intro
Deeply roasty, malt-forward robust porter with notes of dark chocolate, toasted bread, and subtle coffee, balanced by mild earthy hop bitterness. Smooth, full-bodied, perfect for cool autumn game nights.
Ingredients
Steps
Sanitize Brewing Gear
First, dissolve 1 tablespoon of no-rinse brewing sanitizer in 4 liters of cool water in the terracotta crock. Submerge the mash paddle, strainer, fermenter, airlock, thermometer, measuring tools, and auto-siphon for 2 minutes, then set on the clean linen towel to air dry. All surfaces that touch cooled wort must be fully sanitized to prevent off-flavors. This step takes approximately 15 minutes.
Heat Strike Water
Pour 3L of filtered water into the 5-gallon stainless brew kettle, add 1 tsp gypsum and 1 crushed Campden tablet (if using). Heat on the induction burner to exactly 71°C (160°F), checking temperature with the digital instant-read thermometer. Turn off the heat once the target temperature is reached.
Mash the Grains
Slowly stir all crushed malts (pale 2-row, chocolate malt, roasted barley, crystal malt) into the heated water using the stainless mash paddle, stirring thoroughly to break up any dry clumps. The mixture (called mash) should have the consistency of thick oatmeal. Hold the temperature steady at 67°C (153°F) for 60 minutes, covering the kettle with its lid and checking temperature every 15 minutes, adding small amounts of boiling water if the temperature drops below 65°C (149°F). The mash will smell richly of toasted bread and dark chocolate as starches convert to sugar.
Sparge and Collect Wort
After 60 minutes of mashing, heat the remaining 1.5L filtered water to 77°C (170°F). Slowly pour this hot water over the grain bed to rinse residual sugars, then pour the entire mash through the stainless steel fine-mesh strainer back into the brew kettle, separating spent grains from the sweet dark wort. Collect approximately 3.8L (1 gallon) of deep mahogany wort, discarding the spent grains.
Boil the Wort
Turn the induction burner to high, and bring the collected wort to a rolling, gentle boil, adjusting heat as needed to prevent boilovers. Once a steady boil is reached, add 8g (0.28 oz) of East Kent Goldings hops and all of the dark brown sugar, stirring to dissolve. Maintain the boil for 60 minutes, stirring occasionally. At the very end of the boil (flameout), add the remaining 6g (0.22 oz) of East Kent Goldings hops for aroma, and stir once.
Cool the Wort
Turn off the heat immediately after the flameout hop addition. Place the lid securely on the kettle, arrange frozen ice packs around the kettle base on the counter to cool the wort to 21°C (70°F) as quickly as possible (approximately 20 minutes). Avoid opening the lid unnecessarily to prevent contamination. Confirm temperature with the sanitized digital thermometer before proceeding.
Pitch the Yeast
Once the wort is cooled to 21°C (70°F), pour it through the sanitized fine-mesh strainer into the 1-gallon glass fermenter. Sprinkle the entire packet of London ale yeast evenly over the surface of the wort, then seal the fermenter with the sanitized rubber stopper and airlock, filling the airlock halfway with sanitizer solution. Place the fermenter in a dark, temperature-stable spot at 18-21°C (65-70°F) for fermentation.
Ferment and Bottle
Allow the porter to ferment for 14 days, until bubbles in the airlock slow to less than 1 per minute, and the hydrometer reads a stable final gravity of 1.012-1.016 for 3 consecutive days. Use the auto-siphon to transfer the finished beer into sanitized 12oz bottles, adding 1 tsp of corn priming sugar to each bottle to create natural carbonation. Cap bottles tightly, and let condition at room temperature for 2 weeks before chilling and serving.
Tips
2.Always confirm wort temperature is below 24°C (75°F) before pitching yeast: higher temperatures will kill yeast cells or produce harsh solvent-like fusel alcohols that ruin the beer’s smooth flavor.
3.Keep the fermenter sealed for the first 7 days of fermentation: opening the lid exposes the wort to oxygen and airborne bacteria, which can cause sour off-flavors or mold growth on the beer surface.

OMG, I was so nervous to try my first all-grain brew and this robust porter recipe was such a game changer! Followed the steps exactly, let it ferment for 2 weeks, bottled it last weekend and cracked one open last night for game night with my buddies. Everyone was raving about the rich chocolate and coffee notes, said it tasted better than the local craft brewery porter I usually buy. Only note: I added a tiny extra pinch of roasted barley because I love that deep, toasty flavor. 10/10 will make again for our fall camping trip!
I don’t homebrew super often but my husband is obsessed with porters so I made this for his birthday cookout last weekend. I was worried the 90 minute cook time would be a hassle but the steps were so straightforward, even for a medium difficulty recipe! We served it alongside grilled brats and s'mores and it was the perfect pairing. My father in law asked for the recipe before he even finished his first glass, that’s the highest compliment in our family 😂
Solid recipe. Accidentally overboiled by about 10 minutes because my dog stole my oven mitt and I had to chase him around the yard, but the final gravity still landed right where the guide said it would. Got that nice, smooth mouthfeel, no harsh hop bite, exactly what I want in a robust porter. Used cascade hops instead of fuggles because that’s what I had lying around, still turned out great.
Brought a growler of this to our neighborhood potluck last week and it was GONE in 20 minutes. People kept coming up to me asking if I’d bought it from the fancy taproom downtown! I did cut the bittering hops just a tiny bit because I prefer a smoother, less bitter porter and it was perfect for a crowd that drinks a mix of light beers and dark stuff. SO good.
Hey y’all, total newbie here—tried this recipe last weekend but my apartment stayed around 72 degrees during primary fermentation because my AC went out mid-brew! It tastes a little fruity/estery, is that normal? Don’t know if I messed it up bad or if it’s still drinkable.
Scaled this recipe up to a 5 gallon batch for my homebrew club meeting last month and took home 2nd place in the dark beer category! The balance of roasted malt, subtle chocolate, and mild hop bitterness is exactly what judges look for in a robust porter, no weird off flavors when you follow the mash temp guide. Will be brewing this as my go-to winter porter from now on.
My 10 year old loves helping me measure out grains for brew days, and this was our weekend project last Saturday. It’s still in primary right now but the sample I pulled during transfer smelled insane—deep, rich, like a mocha coffee almost. Can’t wait to bottle it next weekend, my kid is already making custom labels for the bottles to give to his uncles for Christmas.
Ugh, I bottled this 3 weeks ago and the first two I opened were totally flat! Did I do something wrong? I followed the priming sugar measurements exactly, I swear. The flavor is amazing, I just want that nice fizz I expect from a good porter.
Used a locally sourced chocolate malt from a small malthouse in upstate NY instead of the standard stuff the recipe calls for, and wow that added such a nice earthy depth. Didn’t use any finings so it’s a little hazy for a porter, but I don’t mind that at all. Super smooth, goes down way too easy after a long day at work.
Made this for a fancy dinner party I hosted last weekend, served it with a dark chocolate flourless torte for dessert and every single guest asked for the recipe. The 90 minute cook time was totally manageable even with prepping the rest of the meal, I pre-measured all my grains the night before so brew day was a breeze. Who needs store bought craft beer when you can make this at home?!
Been brewing porters for over 20 years and this is one of the most solid robust porter recipes I’ve come across for homebrewers. No fancy, hard to find ingredients, the timings are spot on, and the final ABV lands right around 6.5% which is perfect for a sipping beer on cold nights. I added an ounce of oak chips soaked in bourbon during secondary for a little extra kick, and it turned out incredible.
Took a cooler of this to the Ohio State tailgate last Saturday and even my friends who only drink light lager were going back for seconds. It’s robust enough for dark beer fans but not so heavy that you can’t drink a couple while you’re grilling and watching the game. 10/10, will be a permanent tailgate staple from now on.
I live in a tiny studio apartment so I don’t have space for a big draft system, I only do bottle batches. Quick question: can I use dry ale yeast instead of the liquid yeast the recipe calls for? My local homebrew shop is out of the liquid strain right now and I want to brew this this weekend!
Full transparency: I spilled almost a quarter of my wort while transferring it to the fermenter because I tripped over my cat. I topped it off with a little filtered water, crossed my fingers, and it still turned out SO good! The flavor is a tiny bit lighter than I expected but it’s still got that classic roasty porter kick, I was shocked it didn’t get infected or taste watered down. Will definitely be more careful next time, but this recipe is forgiving as hell for newbies who make dumb mistakes.
Has anyone tried making this with gluten free malt? I have celiac so I can’t do regular barley, but I’ve been craving a good robust porter forever and this recipe looks too good to pass up. Would the ratios stay the same if I swap in GF roasted malts?
Brewed this for my husband for our 5th anniversary, since he’s been talking about getting into homebrewing for years. We cracked the first bottle together last night and he said it’s the best anniversary gift I’ve ever gotten him (take that, fancy watch I got him last year 😂). The notes of dark chocolate and a hint of coffee are so smooth, even I liked it and I usually hate dark beer! Will absolutely be brewing this again, might even get my own equipment so we can brew together on weekends.
I was putting off trying this for months because I thought homebrewing took all day, but the 90 minute cook time is totally doable even after work if you get started right when you get home! I started at 5:30, was done with the boil and clean up by 7, just in time to eat dinner and watch my favorite show. The porter turned out perfect, that rich roasty flavor is exactly what I was craving for fall. Don’t sleep on this recipe if you’re short on time!
This is now my go-to winter porch beer. I added a half pound of dark brown sugar during the last 15 minutes of the boil to bump up the ABV just a little and add a subtle molasses note, and it’s perfect for sipping while I sit outside by the fire pit after shoveling snow. It’s got enough body to warm you up but isn’t so heavy that you feel sluggish after one. Can’t recommend this enough for anyone who loves a good, no-fuss robust porter.