American Wheat Beer

title 1
American Wheat Beer
⏱️ cook time 2 hours
🍽️ servings 48
⚡ Difficulty medium

intro

Crisp, hazy American Wheat Beer with soft citrus hop notes, a smooth bready wheat base, and bright, clean finish, perfect for warm-weather sipping with friends.

Ingredients

Crushed 2-row pale malt 6 lbs
Crushed American white wheat malt 4 lbs
Crushed crystal 10L malt 8 oz
Hallertau Mittelfruh hop pellets 1 oz
Cascade hop pellets 1 oz
Citra hop pellets 1 oz
US-05 American ale yeast 11.5g packet
Filtered cold water 6 gallons
Yeast nutrient 1 tsp
Corn sugar (priming) 3/4 cup

Steps

1

Sanitize Brewing Equipment

First, mix no-rinse food-safe sanitizer in the 24oz clear spray bottle per package directions. Spray all surfaces of the brew kettle, stirring spoon, thermometer, grain bag, carboy, stopper, airlock, and auto-siphon thoroughly. Let surfaces sit wet for 60 seconds to kill wild yeast and bacteria, then drain excess solution. Any equipment that touches cooled wort must be fully sanitized to prevent sour off-flavors.

Step 1
step1:Sanitize Brewing Equipment
2

Heat Mash Water

Pour 3.5 gallons of filtered water into the sanitized brew kettle, place over medium heat, and warm to exactly 152°F (67°C), checking temperature regularly with the digital instant-read thermometer. This temperature is ideal for converting grain starches to fermentable sugar while preserving the beer’s light, crisp wheat character.

Step 2
step2:Heat Mash Water
3

Mash the Grains

Combine all crushed 2-row pale malt, white wheat malt, and crystal 10L malt in the white nylon mesh grain bag, pull the drawstring closed loosely, and submerge the bag fully in the 152°F water. Cover the kettle, hold the temperature steady between 148-154°F for 60 minutes, stirring gently every 15 minutes to prevent hot spots. The wort will turn a pale hazy gold and smell sweet and bready as grain starches convert to sugar.

Step 3
step3:Mash the Grains
Step 3
step3:Mash the Grains
4

Boil the Wort

Lift the grain bag out of the kettle, let it drain fully over the kettle for 3 minutes (do not squeeze the bag, as this extracts harsh astringent tannins), then set the spent grains aside. Bring the collected sweet wort to a gentle rolling boil (212°F at sea level). Once boiling is steady, add 1 oz Hallertau Mittelfruh hops and set a timer for 60 minutes. With 15 minutes remaining in the boil, add 1 oz Cascade hops and 1 tsp yeast nutrient. Maintain a steady rolling boil for the full 60 minutes, stirring occasionally to prevent boilovers.

Step 4
step4:Boil the Wort
Step 4
step4:Boil the Wort
5

Cool and Pitch Yeast

After the 60-minute boil, remove the kettle from heat, cover tightly, and cool the wort as quickly as possible to 70°F (21°C) using an ice bath in a clean sink. Pour the cooled wort into the sanitized glass carboy, top up with remaining filtered water to reach exactly 5 gallons total volume. Sprinkle the entire 11.5g packet of US-05 yeast evenly across the wort surface, seal the carboy with the black rubber stopper, fill the airlock halfway with sanitizer, and insert it into the stopper.

Step 5
step5:Cool and Pitch Yeast
Step 5
step5:Cool and Pitch Yeast
6

Ferment the Beer

Move the sealed carboy to a dark, temperature-stable space held at 65-70°F (18-21°C). Let primary fermentation proceed for 7 days, until bubble activity in the airlock slows to 1 bubble every 60 seconds or less, indicating active fermentation is complete. After 7 days, add 1 oz Citra hop pellets directly to the carboy for dry hopping, and let rest for an additional 3 days at the same temperature to build bright citrus and tropical aroma.

Step 6
step6:Ferment the Beer
7

Bottle and Carbonate

Sanitize 48 12-oz glass bottles and metal bottle caps. Boil 3/4 cup corn sugar in 1 cup of water for 5 minutes to create priming sugar solution, pour it into the bottom of a sanitized bottling bucket, then siphon the fermented beer from the carboy into the bucket to mix evenly with the priming sugar. Use the stainless steel auto-siphon to fill each bottle to 1 inch below the rim, cap tightly, and store in the same dark 65-70°F space for 2 weeks to allow natural carbonation to build.

Step 7
step7:Bottle and Carbonate
8

Chill and Serve

After 2 weeks of bottle conditioning, chill bottles for at least 24 hours in the refrigerator to 40°F (4°C). Pour slowly into the tall pilsner glass, leaving the last 1/4 inch of yeast sediment in the bottle, to produce a thick, long-lasting white head. Garnish with a thin twist of orange zest if desired to complement the beer’s citrus hop notes.

Step 8
step8:Chill and Serve

Tips

1.Never squeeze the grain bag after mashing: Squeezing presses harsh, dry tannins from the grain husks into the wort, which creates an unpleasant astringent aftertaste that masks the beer’s soft, bready wheat sweetness. Let the bag drain naturally for 2-3 minutes instead to capture only smooth, sweet wort.
2.Cool wort as quickly as possible after boiling: Fast cooling prevents formation of dimethyl sulfide (DMS), a compound that creates off-flavors reminiscent of canned corn, and reduces the window where wild bacteria or yeast can contaminate the wort before pitching. A simple ice bath in a clean sink cuts cooling time to 20 minutes or less.
3.Keep fermentation temperatures consistent: Fluctuations above 75°F cause US-05 yeast to produce harsh, solvent-like fruity notes, while temperatures below 60°F will stall fermentation entirely and leave unfermented sugar in the beer. A dark interior closet in a temperature-controlled room provides the stable environment needed for clean, balanced flavor.

✨ You May Also Like

Drinks & Beverages
🍜 Mexico

A bright, balanced tequila-based cocktail with zesty fresh lime, smooth orange liqueur, and a signature salt rim, perfect for warm summer sipping.

⏱️ 5 minutesDrinks & Beverages ★ 4.9
Drinks & Beverages
🍜 United States

Thick, creamy, nostalgic classic vanilla milkshake with a rich, smooth texture, topped with whipped cream and a cherry for cool, sweet refreshment.

⏱️ 5 minutesDrinks & Beverages ★ 4.7
Drinks & Beverages
🍜 United States

A bright, golden strong ale with fruity banana-clove notes, subtle hop spice, and soft carbonation, brewed in classic Trappist Tripel tradition.

⏱️ 2 hours aDrinks & Beverages ★ 4.5
Drinks & Beverages
🍜 United States

A frothy, nostalgic American soda fountain treat pairing bubbly cold root beer with creamy vanilla ice cream, perfect for cooling down at warm weather gatherings.

⏱️ 20 minuteDrinks & Beverages ★ 4.8
Drinks & Beverages
🍜 United States

Tart, funky, effervescent American Wild Ale is a complex fruity craft beer brewed with wild yeast, delivering bright, zesty notes perfect for warm-weather sipping.

⏱️ 2 hours aDrinks & Beverages ★ 4.4
Drinks & Beverages
🍜 United States

Bright, bubbly copycat of the iconic American caramel cola, balanced with citrus and warm spice, perfect for sipping ice-cold on hot days.

⏱️ 15 minuteDrinks & Beverages ★ 4.8

American Wheat Beer:Frequently Asked Questions

1.Why is this American Wheat Beer hazy instead of clear like a standard mass-market lager? ▾
That signature haze comes from the high percentage of American white wheat malt in the grain bill—wheat has higher protein content than barley malt, which stays lightly suspended if you skip aggressive fine filtering before bottling. That haze isn’t a flaw! It carries that soft, bready wheat character that defines the style, so don’t stress if your batch isn’t crystal clear.
2.Can I substitute the called-for hops if I don’t have Hallertau Mittelfruh or Cascade pellets at home? ▾
Absolutely, just stick to low-bitterness, bright, citrus-and-floral forward hops to keep the style’s signature soft, balanced profile. For late additions, swap Hallertau Mittelfruh for Mt. Hood or Liberty for similar mild, earthy-floral notes, and replace Cascade with Centennial or Amarillo to keep that bright citrus pop without adding harsh, overpowering bitterness.
3.What does the small amount of crystal 10L malt do here? Can I skip it if I don’t have any? ▾
That tiny crystal 10L addition adds a subtle hint of honeyed, light caramel sweetness that balances the bright hop zing and soft bready wheat base, plus it deepens the beer’s pale golden hue slightly. You can skip it in a pinch, but you’ll lose a little of that smooth, rounded drinkability that makes this beer perfect for warm weather.
4.How long do I need to let this beer condition after bottling before it’s ready to enjoy? ▾
After bottling, let it sit at a steady 65–70°F room temperature for 2 weeks to fully carbonate and let sharp, young fermentation flavors mellow out. For the smoothest, brightest finish, give it an extra 1 week of cold conditioning in the fridge before serving—it makes that clean, crisp finish the recipe highlights really shine.
5.Why does the recipe mix 2-row pale malt with wheat malt instead of using 100% wheat? ▾
A 100% wheat malt mash is extremely thick and sticky, making it really hard to separate the sweet, sugar-rich wort from grain solids during brewing, and it can lead to a heavy, cloying finished beer. The 2-row pale malt adds enough barley husk material to keep the mash running smoothly, while preserving that light, crisp, bready wheat base we’re going for.

Comments (12)

1 week ago

OMG this American Wheat Beer recipe is a total game changer! I brewed a batch last weekend for our neighborhood potluck and everyone was asking for the recipe. It’s got that perfect crisp, slightly citrusy finish without being too bitter—way better than the store-bought wheat beers I usually grab. Took me right around 2 hours of active work like the recipe said, super straightforward even for someone who’s only been homebrewing a year.

5 days ago

Right?! I brought a batch to my family’s Labor Day cookout and even my dad who only drinks macro lager was raving about it. Did you add any extra orange peel at the end? I tossed in a little extra zest and it popped!

3 days ago

So glad it was a hit at the potluck! That citrus finish comes from the late addition of Cascade hops, but adding a touch of fresh orange peel during secondary fermentation is a fantastic custom tweak if you love that bright note.

5 days ago

Wait, I’m pretty new to homebrewing and was nervous about the medium difficulty rating, but this was way more approachable than I expected! My only tiny hiccup was hitting the exact mash temp at first, but once I adjusted my burner it was smooth sailing. The final beer is so smooth, my husband and I have been enjoying a pint every evening after putting the kids to bed. SO good.

3 days ago

So proud of you for nailing your first wheat beer! Mash temp can be tricky for new brewers—pro tip: preheat your mash tun before adding grains to help hold a steady temp next time. Cheers to you and your husband!

2 days ago

Really solid base recipe! I swapped out 10% of the wheat malt for honey malt to add a little extra sweetness, and it turned out amazing. Will definitely be keeping this in my regular rotation for summer brews. It’s perfect for sipping on the porch after mowing the lawn.

3 days ago

Game. Changer. I’ve tried three other American wheat beer recipes over the last year and none of them had that classic, hazy, refreshing mouthfeel I was craving until this one. I brought a growler to my weekly disc golf meetup and my friends already put in requests for me to brew two more batches before our tournament next month.

2 days ago

Disc golf and homebrewed wheat beer? Name a better duo. I did my last batch with a dry hop of Citra and it turned out unreal, you should try it for your tournament batches!

yesterday

Quick question—has anyone tried brewing this with a dry yeast instead of the liquid yeast the recipe calls for? I’ve got a pack of US-05 sitting in my fridge I want to use up before ordering more supplies, and I don’t want to mess up the flavor profile.

30 minutes ago

I used US-05 for my last batch of this! Just make sure you pitch it at the right temp (around 65°F) and it turns out great, maybe a tiny bit crisper than with the liquid wheat yeast but still super tasty.

5 minutes ago

Great question! US-05 works perfectly as a substitute if that’s what you have on hand. It will produce a slightly cleaner, less banana-clove forward profile than the liquid wheat yeast, but it’s still a fantastic match for this recipe. Just be sure to aerate your wort well before pitching!

2 weeks ago

My whole family loved this! Wait, correction—my whole family loved this, even my teenager who usually turns their nose up at anything that isn’t a hard seltzer. We had it with our smoked ribs dinner last Sunday and it paired perfectly, cut right through the rich smoky flavor. 10/10 will brew again.

1 week ago

That pairing sounds incredible! Smoked ribs and crisp wheat beer are such a match made in heaven, I’m so glad even your teen enjoyed it. Thanks for giving the recipe a shot!

1 week ago

Took me a little longer than 2 hours because I got distracted watching football while I was brewing, oops. But the end result was totally worth the extra time! Nice and light, not too hoppy, perfect for our pool days here in Phoenix. I’ll probably add a little raspberry puree to the next batch for a fruity twist.

2 days ago

This is my new go-to meal prep brew! I make a big batch once a month, bottle it up, and I’ve got delicious homemade beer to bring to weeknight dinners, friend hangouts, you name it. Way cheaper than buying craft six packs every week, and it tastes better too. Win win.

yesterday

Same! I did the math after my first batch and it comes out to like 75 cents a bottle, you can’t beat that. I love that this recipe doesn’t require any fancy equipment I don’t already have either.

30 minutes ago

Hmm, my first batch came out a little cloudier than I expected? It still tastes amazing, don’t get me wrong, but I was going for that slightly clearer look you see in the recipe photos. Did I do something wrong during the boil? I followed the timings exactly as written.

5 minutes ago

Don’t stress! American wheat beers are supposed to be a little hazy! If you want it clearer, try using a whirlfloc tablet with 15 minutes left in the boil next time, that helps settle out the extra sediment.

just now

Great question! As mentioned above, haze is totally normal for American wheat beer thanks to the high wheat malt content— it’s part of the style! If you prefer a clearer pour, adding a fining agent like whirlfloc during the boil or cold crashing your fermenter for 2-3 days before bottling will help clear things up without impacting the flavor.

1 week ago

Brewed this for my son’s college graduation party last weekend and it was a massive hit. We went through 3 gallons in less than 2 hours! All his friends kept saying it tasted like the fancy craft beer they pay $15 a four pack for at the liquor store. Definitely a proud dad brewing moment.

5 minutes ago

OMG I cannot believe how good this turned out on my first try!!! I was so intimidated to try all-grain brewing for the first time, but this recipe walked me through every single step with no confusing jargon, no weird hoops to jump through. My roommate and I already bought more grains to make another batch this weekend. 100/10

just now

That makes us so happy to hear! All-grain can feel scary at first, but taking it step by step is all it takes. Can’t wait to hear how your second batch turns out—cheers!

2 hours ago

Took this to my office potluck last week and people were going back for refills before we even finished the main course. I love that it’s not too heavy, so it works for afternoon events where you don’t want something super boozy or filling. Already shared the recipe link in our work Slack channel.