Ancho Ribs

title 1
Ancho Ribs
⏱️ cook time 2 hours 45 minutes
🍽️ servings 4
⚡ Difficulty medium

intro

Fall-off-the-bone pork ribs coated in smoky ancho chile rub, finished with a tangy sweet glaze, boasting deep warm spice perfect for casual summer backyard gatherings.

Ingredients

St. Louis-style pork spare ribs 2 racks (about 1.8kg total)
Dried ancho chiles, stems and seeds removed 3 large (about 30g total)
Kosher salt 2 tbsp
Smoked paprika 1 tbsp
Ground cumin 1 tsp
Garlic powder 1 tsp
Light brown sugar, packed 3 tbsp
Raw unfiltered apple cider vinegar 60ml
Raw wildflower honey 2 tbsp
Fresh garlic cloves, peeled 3
Fresh cilantro, chopped (for garnish) 2 tbsp

Steps

1

Prep the Rib Racks

Place the 2 racks of St. Louis-style ribs on the acacia wood cutting board. Use the 7-inch boning knife to gently lift and peel off the thin papery membrane from the bone side of each rack (this prevents chewy, tough bites). Trim any excess hard, thick fat cap to a uniform 1/4-inch thickness, leaving a thin fat layer to baste the meat as it cooks. Pat ribs completely dry with a corner of the fixed oatmeal cotton towel.

Step 1
step1:Prep the Rib Racks
2

Make Ancho Spice Rub

Tear the seeded, stemmed ancho chiles into 2-inch pieces and place them in the stainless steel spice grinder along with 2 tbsp kosher salt, 1 tbsp smoked paprika, 1 tsp ground cumin, 1 tsp garlic powder, and 1 tbsp of the packed light brown sugar. Grind for 30-45 seconds until the mixture is a fine, deep rust-red powder with no large, flaky chile pieces remaining. Pour the finished ground rub into the medium stainless steel mixing bowl.

Step 2
step2:Make Ancho Spice Rub
Step 2
step2:Make Ancho Spice Rub
3

Coat Ribs with Rub

Sprinkle the ancho spice rub evenly over every surface of both rib racks, including the narrow sides and gaps between the bones. Use clean hands to press the rub firmly into the meat so it adheres tightly, creating a uniform thin coating across the entire surface. Let the rubbed ribs rest at room temperature for 20 minutes while you preheat your grill or oven to 300°F (150°C), set up for indirect heat cooking.

Step 3
step3:Coat Ribs with Rub
4

Slow Cook Ribs Low

Arrange the rub-coated ribs bone-side down on the matte black steel rib rack, positioned over indirect heat on the grill (or on a wire rack set over a rimmed baking sheet in the oven). Close the grill lid or oven door and cook for 2 hours, maintaining a steady 300°F internal cooking temperature, until the rub has set into a dark matte crust and the meat has started to pull back from the ends of the bones by roughly 1/4 inch.

Step 4
step4:Slow Cook Ribs Low
5

Mix Tangy Glaze

While the ribs cook, add the remaining 2 tablespoons packed brown sugar, 60ml apple cider vinegar, 2 tbsp honey, and 3 peeled garlic cloves to the same medium stainless steel mixing bowl (no need to wash it after the rub, as leftover spice adds depth) and whisk with the stainless steel whisk until completely smooth. The glaze should be thin enough to brush easily, with a balanced sweet, tangy, smoky flavor from residual rub in the bowl.

Step 5
step5:Mix Tangy Glaze
6

Wrap Ribs to Tenderize

Tear two large sheets of heavy-duty aluminum foil, each 60cm long, enough to fully enclose a single rib rack. Brush a thin layer of glaze over the top of each partially cooked rib rack, then wrap tightly in the foil, crimping all edges to trap steam inside. Return the foil-wrapped ribs to indirect heat and cook for an additional 30 minutes, until the digital instant-read thermometer inserted into the thickest part of the meat (avoiding contact with bone) reads 195°F (90°C).

Step 6
step6:Wrap Ribs to Tenderize
Step 6
step6:Wrap Ribs to Tenderize
7

Sear for Sticky Crust

Unwrap the ribs from the foil, reserving any collected savory juices in the foil to stir into the remaining glaze. Return the unwrapped ribs directly to the grill grate (or upper oven rack) over medium heat, brushing generously with the remaining juice-infused glaze every 5 minutes for 15 minutes, until the glaze is sticky, glossy, and slightly caramelized at the edges, with no thin, runny spots left on the rib surface.

Step 7
step7:Sear for Sticky Crust
8

Rest and Plate Ribs

Transfer the finished glossy ribs to the large oval matte terracotta serving platter, and let rest uncovered for 10 minutes to allow muscle fibers to relax and juices to redistribute. Sprinkle with 2 tbsp chopped fresh cilantro before serving, cutting between the bones into individual portions if desired.

Step 8
step8:Rest and Plate Ribs

Tips

1.Always remove the tough silverskin membrane from the bone side of the ribs: this membrane does not break down during low-and-slow cooking, and will leave a chewy, rubbery texture even if the meat underneath is perfectly tender. Grip the slippery membrane with a folded paper towel for extra traction to peel it off in one piece.
2.Maintain a steady 300°F cooking temperature during the initial slow cook phase: temperatures above 325°F will cause the meat muscle fibers to seize up and become tough, while temperatures below 275°F will extend cook time significantly and prevent the spice rub from forming a nice matte crust (called 'bark' in BBQ terms).
3.Let the finished ribs rest for a full 10 minutes before cutting or serving: slicing into hot ribs immediately causes all the flavorful, juicy rendered fat and meat juices to run out onto the platter, leaving the meat dry. Resting allows the muscle fibers to relax and reabsorb moisture for juicier, more tender bites.

✨ You May Also Like

BBQ & Grilling
🍜 United States

Tender, melt-in-your-mouth beef brisket with a crisp, spiced bark, slow-smoked to deep smoky perfection, the iconic centerpiece of Texas backyard barbecue.

⏱️ 12 hours BBQ & Grilling ★ 4.4
BBQ & Grilling
🍜 Korea

Tender, sweet-savory marinated beef short ribs, a beloved Korean BBQ staple with caramelized, slightly charred edges and deep umami flavor, perfect for outdoor summer gatherings.

⏱️ 4 hours 2BBQ & Grilling ★ 4.8
BBQ & Grilling
🍜 United States

Juicy grilled beef patties topped with smoky homemade chili, melted cheddar, and tangy pickles on toasted brioche buns for a hearty, flavor-packed handheld meal.

⏱️ 40 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

A sweet, smoky, tangy BBQ sauce brightened with peak-season dark cherries, ideal for glazing grilled ribs, chicken, pork, or summer roasted veggies.

⏱️ 35 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

Rich, smoky, slightly sweet homemade bourbon BBQ sauce with deep caramel notes, ideal for glazing grilled ribs, chicken, and burgers at cookouts.

⏱️ 25 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

Iconic Alabama-style BBQ featuring tender hickory-smoked chicken slathered in tangy creamy white sauce, a beloved regional Southern cookout staple.

⏱️ 3 hoursBBQ & Grilling ★ 5

Ancho Ribs:Frequently Asked Questions

1.What makes St. Louis-style spare ribs the best choice for this recipe instead of baby back ribs? ▾
St. Louis-style ribs are trimmed to a neat, uniform rectangular shape that cooks super evenly, and their higher fat marbling stays juicy through the long, slow cook. They have a richer, meatier pork flavor that stands up perfectly to the bold ancho chile rub, instead of getting overpowered like leaner baby backs sometimes can.
2.Can I mix up the ancho chile rub ahead of time for easier party prep? ▾
Absolutely! Blend the dried ancho chile, kosher salt, smoked paprika, and cumin up to 2 weeks in advance, and store it in an airtight glass jar in a cool, dark pantry. The spices will meld slightly as they sit, creating an even deeper, more cohesive smoky warm flavor when you’re ready to coat your ribs.
3.How do I get that fall-off-the-bone texture without making the ribs mushy? ▾
Skip boiling your ribs—that’s the top cause of mushy, flavorless meat. Instead, cook them low and slow at 225°F for 3.5 to 4 hours, pulling them when internal temp hits 195–203°F, and a toothpick slides into the thickest part with almost no resistance. This gives tender ribs that hold their shape instead of falling apart when you pick them up.
4.What’s a good substitute if I can’t find dried ancho chiles? ▾
If dried anchos are hard to track down, use 2 tablespoons of pure ancho chile powder as a direct swap for the ground whole chiles, or mix equal parts mild New Mexico chile powder and a tiny pinch of chipotle powder to match ancho’s deep, fruity, mild smoke. Skip generic chili powder—it has added garlic, oregano, and salt that will throw off the rub balance.
5.Do I really need to remove the thin membrane on the back of the ribs? ▾
Yes, always peel off that tough, silvery membrane on the bone side of the ribs before applying your rub. Left intact, it turns chewy and rubbery as it cooks, and blocks rub and smoke flavor from penetrating that side of the meat. Slide a butter knife under one edge, grip it with a paper towel, and pull it off in one smooth sheet.
6.When should I apply the tangy sweet glaze so it doesn’t burn? ▾
Wait to brush on your glaze until the last 15–20 minutes of cook time. If you apply it too early, the sugar in the glaze will burn and turn bitter over the long low heat, instead of caramelizing into that sticky, glossy, sweet-tangy coating we love. Apply two thin coats for even, full coverage across every rack.
7.Can I make these ribs on a regular gas grill if I don’t own a smoker? ▾
You totally can! Set your gas grill up for indirect heat by turning on only one set of burners, and place ribs on the unlit side to hold a steady 225°F. Toss a small foil pouch of soaked hickory or mesquite wood chips on the lit burner to add that classic smoky note that pairs perfectly with the ancho rub.
8.How long should I let the ribs rest after cooking before serving? ▾
Let finished ribs rest loosely tented with foil for 10 to 15 minutes right after pulling them off the heat. This gives the muscle fibers time to reabsorb all their juicy, flavorful moisture, so every bite is tender instead of having all the juices run out onto your plate the second you cut into them.
9.How can I adjust these ribs to be less spicy for kids or heat-averse guests? ▾
Ancho chiles are already pretty mild, but you can cut the amount of ground ancho in half and replace it with extra smoked paprika if you want zero noticeable heat. The rub will still have that deep, rich smoky flavor without any lingering spice, so every guest at your backyard gathering can enjoy them.
10.What’s the best way to store and reheat leftover ribs without drying them out? ▾
Wrap leftover ribs tightly in plastic wrap or heavy-duty foil, and store them in the fridge for up to 4 days, or freeze for up to 3 months. To reheat, wrap them in foil with a tiny splash of apple juice, and warm in a 250°F oven for 20–25 minutes, adding a quick brush of extra glaze if you have it on hand.

Comments (3)

3 days ago

Tried these for our Fourth of July cookout and they were SO good! I was a little intimidated at first since the recipe is marked medium difficulty, but the steps were super straightforward even for a casual backyard griller like me. The ancho chile adds such a deep, rich smokiness that’s way better than the generic store-bought BBQ sauce I usually slather on ribs. Only hiccup was my first rack got a little too charred on the edges because my old gas grill runs way hotter than the dial says, so I turned the heat down 25 degrees for the second rack and it came out perfect — meat slid right off the bone. Definitely adding this to my regular summer cookout rotation!

2 days ago

Oh thank goodness you mentioned the hot grill thing! My beat up charcoal grill runs so hot I’ve burned so many rib racks in the past, I would’ve totally messed these up if I hadn’t seen your note. Did you end up adding any extra cook time when you turned the temp down?

1 day ago

Great catch about adjusting for hot grills, that’s such a common pain point! If your grill runs 25 degrees hotter than the recipe calls for, add about 10-15 minutes of covered cook time to make sure the ribs get tender without charring too fast on the outside. So stoked you loved the ancho flavor!

1 week ago

I meal prepped these ribs on Sunday for weekday lunches and they held up so much better than I expected! My kids loved it too, they kept sneaking bites off the tray while I was portioning everything out for the week. I was nervous the BBQ sauce would get soggy or the meat would get tough when I reheated portions at work, but that smoky ancho kick was still just as bold on day 3 as it was right off the grill. The 2 hour 45 minute cook time is definitely too long for a chaotic weeknight, but it’s totally manageable to knock out on a lazy Sunday. 10/10, already bought extra ancho chiles to make these again next week!

5 days ago

So happy to hear these work great for meal prep! Quick pro tip for reheating: wrap individual portions in foil and warm them in the oven (or even a work toaster oven) at 325°F for 15 minutes instead of using the microwave — that keeps the fall-off-the-bone texture and prevents the sauce from getting mushy. Thanks so much for giving the recipe a go!

30 minutes ago

OMG, I just pulled these Smoky Ancho BBQ Ribs out of the oven and my entire apartment smells insane! I grabbed a bag of dried ancho chiles on a whim at the grocery store last week and had no clue what to do with them, so stumbling on this recipe felt like fate. The flavor is perfectly balanced — smoky, a tiny bit spicy, just the right amount of sweet. The ancho chile BBQ sauce is a total game changer, I’m never going back to plain bottled sauce for ribs again. I’m bringing a whole rack to my roommate’s birthday potluck tomorrow, and I already know people are gonna hound me for the recipe. Worth every minute of cook time, no notes!