DIPA
intro
Juicy, aromatic hazy Double IPA (DIPA) bursting with tropical citrus and pine hop notes, balanced soft malt sweetness, and a crisp, clean bitter finish—perfect for sharing at warm-weather gatherings.
Ingredients
Steps
Sanitize Brewing Gear
Mix 15ml no-rinse brewing sanitizer with 4L cool filtered water in the stainless steel brew pot. Submerge the stirring spoon, strainer, fermentation jug airlock, and thermometer for 2 minutes, then remove and air dry on the clean counter. No residual suds should remain—proper sanitization prevents off-flavors from wild bacteria or yeast.
Mash Crushed Malts
Heat 2.5L filtered water in the brew pot to 152°F (67°C), monitored with the clipped-on digital thermometer. Add all crushed 2-row and crystal malt, stirring with the long stainless steel spoon to break up any dry clumps. Cover the pot with the lid and hold the temperature steady at 150-155°F for 60 minutes, until the liquid (called wort) turns a deep golden amber and tastes sweet, toasty, and malty.
Strain Out Grains
After the 60-minute mash, set the fine mesh strainer over the top of the brew pot, then pour the entire grain and wort mixture through the strainer to separate spent grains from the sweet amber wort. Slowly pour 1L of 170°F (77°C) filtered water over the trapped grains to rinse off remaining trapped sugars, then discard the spent grains from the strainer. Return all collected wort to the brew pot.
Bring Wort to Boil
Place the brew pot with strained wort over high heat, bring to a steady, rolling boil (212°F / 100°C at sea level). Watch carefully during the first 10 minutes of heating to avoid boilovers, adjusting heat to maintain a rolling but not violent, bubbling boil for 60 minutes total.
Add Hops on Schedule
Once a steady boil is reached, set a 60-minute timer. Add 8g Cascade hops at the 60-minute mark (start of boil) for clean, balanced bittering, add 5g Citra and 5g Mosaic hops when 15 minutes of boil time remain for bright hop flavor, then add the remaining 7g Cascade, 15g Citra, and 20g Mosaic hops when the timer hits 0 (heat turned off, flame out) for intense tropical fruit, citrus, and pine aroma. Stir gently after each addition with the stainless steel spoon to fully integrate hops into the wort.
Chill Wort Rapidly
As soon as the final flame-out hop addition is stirred in, cover the pot with the lid. Move the pot to an ice water bath to chill the wort to 70°F (21°C) as quickly as possible (target: within 30 minutes) to prevent off-flavors and reduce contamination risk. Avoid opening the lid unnecessarily during chilling.
Pitch Brewing Yeast
Once wort is fully chilled to 70°F, pour it through the clean fine mesh strainer into the 1-gallon glass fermentation jug to filter out large hop and grain debris. Sprinkle the entire 11g packet of US-05 dry ale yeast evenly over the surface of the wort, then seal the jug with the sanitized rubber stopper and airlock (filled halfway with sanitizer solution) to let carbon dioxide escape while keeping contaminants out. Store the jug in a dark, 65-68°F spot for 2 weeks to ferment.
Bottle and Condition
After 2 weeks of fermentation, when bubbles stop rising through the wort and a thin layer of pale yeast sediment settles at the bottom of the jug, use the sanitized auto-siphon to transfer the finished beer into sanitized amber 12oz bottles, adding one small carbonation tablet to each bottle before crimping on a crown cap with the bottle capper. Let bottles condition at room temperature for 1 week to build natural carbonation, then chill for 24 hours before serving.
Pour and Garnish
Open a fully chilled, carbonated bottle of DIPA (40°F / 4°C). Tilt the 16oz tulip glass at a 45-degree angle, pour beer slowly down the inside of the glass to build a 2cm thick, fluffy white head, then straighten the glass for the final pour. Rest a single fresh hop cone on the glass rim for garnish, if desired.
Tips
2.Chill your wort to 70°F or below before adding yeast, as temperatures above 80°F will kill active yeast and produce harsh, solvent-like fusel alcohols that ruin the smooth, drinkable quality of the beer.
3.Avoid opening the fermentation jug unnecessarily during the 2-week fermentation period, as introducing oxygen or wild bacteria at this stage can cause stale, cardboard-like off-flavors or spoiled batches.

OMG this recipe is an absolute game changer! I’ve been trying to nail a hazy DIPA for over a year and every batch came out either too bitter or weirdly thin, but this one turned out perfectly juicy, just like the stuff I pay $18 a four pack for at the local bottle shop. Brought a growler to my buddy’s backyard cookout last weekend and everyone was begging for the recipe. Total cook time was right at 90 minutes like it said, super manageable even for someone who’s only been brewing 6 months!
SO good, my whole homebrew club went crazy for this when I brought it to our monthly meetup! I was a little nervous because medium difficulty had me worried I’d mess up the mash temp, but the instructions were so clear I nailed it on the first try. Got notes of mango, pineapple, and just a tiny hint of orange zest, exactly what I want in a hazy DIPA. Only thing I did different was add an extra half ounce of Citra hops because I’m a hop fiend, no regrets.
Tried this last weekend and uh… mine came out way darker than the hazy golden color in the photo? Did I overdo the roast on the grain? Flavor is still really good, just looks more like a pale ale than a DIPA, haha. Also, how long do you usually let this condition before cracking the first bottle? I waited a week and it was good but felt like it was missing a little something.
Game changer for tailgate season! I brewed a 5 gallon batch of this before the first college football game and it was gone by halftime. Even my friends who swear they “don’t like IPAs” were going back for seconds. The 90 minute brew day was easy to fit in after work one night, no fancy equipment needed beyond my basic starter kit.
First time ever attempting a double IPA and I was so intimidated by the medium difficulty tag, but this was way more straightforward than I expected! I did end up making a tiny mess when I transferred to the fermenter because my siphon slipped, but that’s 100% user error, not the recipe’s fault. Tasted the test sample after bottling and wow, that tropical hop punch is unreal.
Made this for our neighborhood potluck a couple weeks ago and I can’t count how many people asked for the link to the recipe! It’s perfectly balanced, not so boozy that it knocks you out after one, but has that big hop flavor everyone looks for in a DIPA. I will say, make sure you have enough fridge space for all the bottles because you’re gonna want to make this all the time.
Wait, has anyone tried this with a mix of Mosaic and Citra hops instead of all Citra? My local homebrew shop was out of a couple things on the ingredient list and I’m wondering if swapping will mess up the final flavor too much.
Just bottled my third batch of this last night, it’s become my go-to house beer! My teenage son even said it smells “way better than the cheap stuff his boss drinks” — win in my book. Perfect for Sunday dinners with the family when we’re grilling brats and burgers.
I was skeptical a homebrewed DIPA could compete with the commercial ones from my favorite Denver breweries, but WOW. This is so smooth, no weird aftertaste, that hazy mouthfeel is spot on. I messed up the first boil by letting it go 10 minutes over, but it still turned out great, super forgiving recipe.
This is my new go-to to have on hand for weeknight dinners and impromptu friend hangouts! I keep a few growlers chilled in the fridge so I never show up to a gathering empty handed, and it’s always a hit. The 90 minute cook time is so doable even on a busy weeknight, I can knock it out right after making dinner as part of my weekly weekend meal prep.