Pellet Grill

title 1
Pellet Grill
⏱️ cook time 4 hours
🍽️ servings 4
⚡ Difficulty medium

intro

Tender, fall-off-the-bone wood-smoked baby back ribs cooked low and slow on a pellet grill, coated in savory dry rub and finished with sticky BBQ glaze.

Ingredients

Baby back pork ribs 2 racks (1800 grams total)
Hickory wood pellets 900 grams
Light brown sugar 80 grams
Kosher salt 2 tablespoons (30 grams)
Smoked paprika 3 tablespoons (21 grams)
Garlic powder 1 tablespoon (9 grams)
Onion powder 1 tablespoon (7 grams)
Ground black pepper 1 teaspoon (3 grams)
Cayenne pepper ½ teaspoon (1 gram)
Apple cider vinegar 60 ml
Apple juice 120 ml
Unsalted butter 4 tablespoons (56 grams, cut into 4 pats)
Tomato-based BBQ sauce 180 ml

Steps

1

Prep ribs and apply rub

First, pry the thin silver membrane from the bone side of each rib rack loose with a butter knife, then pull it off in one smooth piece to avoid chewy texture. Pat both racks completely dry with paper towels. Mix 80g light brown sugar, 30g kosher salt, 21g smoked paprika, 9g garlic powder, 7g onion powder, 3g ground black pepper, and 1g cayenne pepper in a small bowl to make the dry rub. Coat every surface of the ribs generously with the rub, pressing gently to help it adhere, then let the ribs rest at room temperature for 30 minutes.

Step 1
step1:Prep ribs and apply rub
2

Preheat pellet grill

Fill the pellet grill hopper with 900g of hickory wood pellets. Set the grill’s digital control to 225°F (107°C), close the lid, and preheat for 15 minutes until the temperature holds steady and thin, wispy blue smoke (not thick white smoke) drifts from the exhaust vent. Calibrate the grill’s built-in temperature probe to ensure accurate readings during cooking.

Step 2
step2:Preheat pellet grill
3

Smoke ribs unwrapped

Place the seasoned rib racks bone-side down directly on the grill grates, positioned over the heat deflector (away from direct flame) for even cooking. Close the lid and smoke the ribs for 2 full hours at a consistent 225°F (107°C), avoiding unnecessary lid openings to prevent heat and smoke loss. At the end of this phase, the ribs will have a deep mahogany outer bark and feel firm to the touch.

Step 3
step3:Smoke ribs unwrapped
4

Wrap ribs to braise

After 2 hours of open smoking, use heat-resistant gloves to transfer each rib rack to a separate large sheet of heavy-duty aluminum foil. Drizzle each rack with 60ml apple juice and 30ml apple cider vinegar, then top each with 2 pats (28g total per rack) of unsalted butter. Crimp the foil tightly around each rack to create a fully airtight packet with no gaps for steam to escape. Return the wrapped ribs to the grill, close the lid, and cook for 1 hour at 225°F (107°C).

Step 4
step4:Wrap ribs to braise
5

Sauce and finish cooking

After 1 hour of wrapped braising, carefully open the foil packets (tilt the packet away from your face to avoid burns from escaping hot steam) and move the ribs back directly onto the grill grates. Brush all surfaces of both racks evenly with 180ml of tomato-based BBQ sauce. Close the lid and cook for 30 additional minutes at 225°F (107°C), until the sauce sets into a sticky, glossy coating and the rib bones pull back roughly ¼ inch from the meat at the ends.

Step 5
step5:Sauce and finish cooking
6

Rest and serve ribs

Transfer the fully cooked ribs to a large wooden cutting board, tent loosely with a small sheet of aluminum foil, and let them rest for 15 minutes at room temperature to let juices redistribute through the meat. Slice between the bones into individual portions, and serve with extra BBQ sauce on the side if desired.

Step 6
step6:Rest and serve ribs

Tips

1.Never skip removing the tough, papery silver membrane from the bone side of the ribs; leaving it intact will result in chewy, unpleasantly rubbery bites even after hours of low-and-slow cooking.
2.Limit lid openings during the first 2 hours of smoking: every time you lift the lid, the grill temperature drops 25–50°F, adding 10–15 minutes of cook time and reducing consistent smoke penetration.
3.Swap hickory pellets for apple wood pellets for a milder, fruitier smoke flavor that pairs beautifully with pork, or use a 70/30 mix of hickory and mesquite for a bolder, earthier profile—avoid 100% mesquite for the full cook, as it can create a bitter, ashy taste on the ribs.

✨ You May Also Like

BBQ & Grilling
🍜 United States

Tender, melt-in-your-mouth beef brisket with a crisp, spiced bark, slow-smoked to deep smoky perfection, the iconic centerpiece of Texas backyard barbecue.

⏱️ 12 hours BBQ & Grilling ★ 4.4
BBQ & Grilling
🍜 Korea

Tender, sweet-savory marinated beef short ribs, a beloved Korean BBQ staple with caramelized, slightly charred edges and deep umami flavor, perfect for outdoor summer gatherings.

⏱️ 4 hours 2BBQ & Grilling ★ 4.8
BBQ & Grilling
🍜 United States

Juicy grilled beef patties topped with smoky homemade chili, melted cheddar, and tangy pickles on toasted brioche buns for a hearty, flavor-packed handheld meal.

⏱️ 40 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

A sweet, smoky, tangy BBQ sauce brightened with peak-season dark cherries, ideal for glazing grilled ribs, chicken, pork, or summer roasted veggies.

⏱️ 35 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

Rich, smoky, slightly sweet homemade bourbon BBQ sauce with deep caramel notes, ideal for glazing grilled ribs, chicken, and burgers at cookouts.

⏱️ 25 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

Iconic Alabama-style BBQ featuring tender hickory-smoked chicken slathered in tangy creamy white sauce, a beloved regional Southern cookout staple.

⏱️ 3 hoursBBQ & Grilling ★ 5

Pellet Grill:Frequently Asked Questions

1.What temperature should I set my pellet grill to for these smoked baby back ribs? ▾
Set your pellet grill to a steady 225°F for this low-and-slow cook, the sweet spot for rendering fat without drying out the delicate rib meat. Load the hopper with hickory pellets for classic wood smoke flavor, and give the grill 10–15 minutes to preheat fully and produce thin, consistent blue smoke before adding your racks.
2.Do I need to remove the membrane from the back of the ribs before smoking? ▾
Absolutely—skipping this step leaves you with chewy, tough bites that block dry rub from penetrating the meat. Slide a butter knife under the thin silverskin on the bone side, grab the loose edge with a paper towel for a firm grip, and pull the whole membrane off in one smooth sheet before applying rub.
3.How much dry rub should I use per rack of baby back ribs? ▾
For a standard 2.5–3 pound rack of baby backs, use roughly 3–4 tablespoons of your mixed dry rub (light brown sugar, kosher salt, smoked paprika, plus any optional add-ins). Coat every surface evenly—top, bottom, and between bones—then let ribs rest 30 minutes at room temp so the rub forms a sticky binder.
4.Why are hickory pellets recommended instead of other wood flavors? ▾
Hickory produces a rich, slightly bacon-y, bold smoke flavor that pairs perfectly with pork and the sweet-savory dry rub, without overpowering the meat. If you prefer milder smoke, swap 1/3 of the hickory for apple or cherry pellets, but straight hickory delivers that classic, traditional smoked rib taste most people crave.
5.How long do these baby back ribs take to smoke at 225°F? ▾
A standard 2.5–3 pound rack will take roughly 4.5–5.5 hours total at 225°F, but always prioritize tenderness and temperature over a strict timer. You’ll know they’re close when meat pulls back 1/4–1/2 inch from bone ends, and a toothpick slides into the thickest part with almost no resistance.
6.Do I need to wrap ribs in foil or butcher paper during the cook? ▾
Wrapping is totally optional for this recipe, but if you want extra-tender, fall-off-the-bone results, wrap ribs in foil with a splash of apple juice after 3 hours of smoking, then cook for another 1.5 hours before unwrapping to glaze. Skip the wrap if you prefer a thicker, chewier outer bark.
7.What internal temperature means the ribs are done and safe to eat? ▾
Pork ribs are technically safe to eat at 145°F, but for that tender, fall-off-the-bone texture you want, aim for 195–203°F in the thickest part of the rack, away from bone. At that range, tough connective tissue fully breaks down into juicy, melt-in-your-mouth fat without the meat turning mushy.
8.When is the right time to apply the BBQ glaze to the ribs? ▾
Brush your sticky BBQ glaze on during the final 20–30 minutes of cook time, once ribs hit roughly 190°F internally. Applying glaze too early causes the sugar in it to burn and turn bitter from long heat exposure, while this late application lets it set into a shiny, sticky coating that doesn’t char.
9.Can I use frozen baby back ribs for this recipe? ▾
I strongly recommend thawing ribs fully in the fridge for 24–36 hours before smoking for even cooking and consistent smoke penetration. If you’re in a pinch, you can smoke frozen ribs, but add 1.5–2 hours of cook time, and expect patchy rub adhesion and slightly less even flavor.
10.How do I keep my ribs from drying out on the pellet grill? ▾
First, avoid opening the grill lid too often, as that drops internal temperature and lets moisture escape. If you’re not wrapping your ribs, spritz them lightly with a 50/50 mix of apple cider vinegar and water every 45 minutes after the first 2 hours to keep the surface moist and help smoke stick.
11.Can I mix the dry rub ahead of time? ▾
Absolutely! Combine your light brown sugar, kosher salt, smoked paprika, and any other dry seasonings up to 3 months ahead, and store the mix in an airtight container in a cool, dark pantry. Just give the jar a good shake before use, as the brown sugar may clump slightly during storage.
12.Why does my dry rub sometimes taste bitter on finished ribs? ▾
Bitter rub almost always traces back to two common issues: either you used old, stale smoked paprika that’s developed a harsh, off flavor, or you applied sugary glaze too early so the brown sugar in the rub and glaze burned over the long cook. Use fresh spices and keep grill temps steady to avoid this.
13.How long should I let ribs rest after taking them off the grill? ▾
Let your finished glazed ribs rest for 10–15 minutes, tented loosely with foil, before slicing. This short rest gives hot, rendered juices time to redistribute back through the meat instead of running all over your cutting board when you cut between bones, so every bite stays juicy and flavorful.
14.Can I use spare ribs instead of baby back ribs for this recipe? ▾
You absolutely can, but you’ll need to adjust cook time to account for the cut difference. Spare ribs are larger, fattier, and tougher than leaner baby backs, so plan for 6–7 hours of total cook time at 225°F to get the same tender texture. The same rub, hickory smoke, and glaze method works perfectly.
15.How can I test rib tenderness without a meat thermometer? ▾
Use the simple bend test: pick up the rack in the middle with a pair of long tongs and gently lift it. If the rack bends easily, cracks slightly on the top surface, and meat pulls away from the bone ends, it’s perfectly tender. If it’s stiff and doesn’t bend, give it another 20–30 minutes on the grill.

Comments (3)

3 days ago

OMG these ribs were an absolute game changer for our Memorial Day backyard cookout! I was nervous to smoke ribs for the first time on my new pellet grill but the timing instructions were spot on — fall off the bone tender, no tough chewy bits at all. My kids loved them so much they asked for seconds before they even finished their first rib! Only thing I adjusted was adding a little extra honey to the glaze because my crew has a massive sweet tooth. 10/10 will be making these for every potluck this summer.

2 days ago

Wait how much extra honey did you add? I’m making these for my husband’s birthday dinner this weekend and he’s obsessed with all things sweet, I’d love to copy your tweak!

yesterday

So stoked these were a hit at your Memorial Day cookout, Molly! That extra honey tweak sounds absolutely delicious — we love when folks make the recipe their own to fit their crew’s tastes. Quick pro tip: if you want that honey glaze extra caramelized, crank the grill up to 375°F for the last 10 minutes of cook time after brushing it on, it makes such a difference!

1 week ago

Solid rib recipe, though mine took almost 45 minutes longer than the listed 4 hour cook time to hit that perfect probe-tender texture! I kept the grill temp locked at 225 the whole time like the instructions said, so I’m thinking either my pellet grill runs cool or the racks I picked up were extra meaty from the butcher. Flavor was incredible though — the dry rub ratio is perfect, not too salty, just the right amount of smoky paprika and brown sugar. I’ll definitely make these again, I’ll just budget an extra hour of buffer time next go around to be safe.

5 days ago

Thanks so much for the honest feedback, Jake! Pellet grills can absolutely run 10-25°F cool if they haven’t been calibrated in a while, and extra-thick, meaty racks from the butcher will always add a bit of cook time too. So glad you loved the dry rub! We always recommend going by probe tenderness instead of strict clock time to get that perfect fall-apart bite every time.

30 minutes ago

SO good! I made a double batch of these on Sunday for meal prep and they held up perfectly all week for quick, satisfying lunches. I followed the tip to wrap them tight in butcher paper at the 2 hour mark and the smoke ring was chef’s kiss — even my super picky roommate stole two ribs off my plate when she got home from a late work shift on Tuesday. Already sent this recipe to my whole family group chat, we’re planning to make a massive batch for our big family camping trip next month!