Pumpkin Porter

title 1
Pumpkin Porter
⏱️ cook time 1 hour 15 minutes
🍽️ servings 8
⚡ Difficulty medium

intro

Rich, roasty homemade pumpkin porter with warm baking spice notes, deep caramel malt flavor, and subtle earthy pumpkin, perfect for crisp autumn Halloween gatherings.

Ingredients

Filtered cold water 1 gallon (3.8L)
Light dry malt extract 1 lb (450g)
Unsweetened roasted sugar pumpkin puree 2 cups (300g)
Crushed crystal malt (60L) 2 oz (55g)
Crushed chocolate malt 1 oz (28g)
East Kent Goldings hops 1 oz (28g), divided
Ground cinnamon 1 tsp
Ground ginger 1/2 tsp
Freshly grated nutmeg 1/4 tsp
Ground clove 1/8 tsp
Dry ale yeast 1 packet (5g)
Corn sugar (for carbonation) 2 tsp

Steps

1

Steep Crushed Grains

Pour 2 quarts (1.9L) of filtered water into the 8-quart stainless steel stock pot, heat to 155°F (68°C) over medium heat. Place crushed crystal malt and chocolate malt in the white cotton muslin steeping bag, tie loosely, and submerge in the heated water. Cover the pot and steep for 20 minutes, holding a steady temperature between 150-160°F; do not boil, as high heat extracts harsh bitter tannins from grain husks. The water will deepen to a rich amber color as it steeps. After 20 minutes, lift the grain bag, let it drain fully over the pot (do not squeeze), and discard spent grains.

Step 1
step1:Steep Crushed Grains
2

Add Malt and Pumpkin

Bring the steeped grain water to a gentle rolling boil. Once boiling, slowly stir in the full 1lb of light dry malt extract, mixing continuously with the slotted stainless steel spoon until fully dissolved with no dry clumps remaining. Stir in the 2 cups of unsweetened roasted pumpkin puree, mixing until fully incorporated into the wort. Return to a steady gentle boil, reducing heat slightly if thick foam rises quickly to prevent boil-overs. The finished wort will be a deep, opaque burnt-orange brown.

Step 2
step2:Add Malt and Pumpkin
Step 2
step2:Add Malt and Pumpkin
3

Add Bittering Hops

Once the wort returns to a steady boil, add 3/4 oz of the East Kent Goldings hops, reserving the remaining 1/4 oz for late addition. Set the small digital kitchen timer for 45 minutes, maintaining a gentle rolling boil and stirring occasionally to prevent pumpkin solids from sticking to the pot bottom. Skim any thick, billowy krausen foam that rises to the surface with the slotted spoon, discarding it into a spare prep bowl to prevent boil-overs.

Step 3
step3:Add Bittering Hops
4

Add Spices and Late Hops

When 10 minutes remain on the 45-minute boil timer, add the reserved 1/4 oz East Kent Goldings hops, ground cinnamon, ground ginger, freshly grated nutmeg, and ground clove to the pot, stirring well to combine. Warm, spicy aromatic notes will become immediately noticeable as the spices hit the hot wort. Continue boiling for the remaining 10 minutes for a total boil time of 55 minutes.

Step 4
step4:Add Spices and Late Hops
5

Cool and Strain Wort

When the boil timer goes off, turn off the heat, and move the pot to a cool section of the counter to rapidly cool the wort to 70°F (21°C), roughly 20 minutes. Once cooled, pour the wort through the fine-mesh stainless steel strainer into the 1-gallon clear glass fermentation jug, straining out all hop particles and coarse pumpkin solids. Top the jug with extra filtered cold water as needed to reach the full 1-gallon volume mark.

Step 5
step5:Cool and Strain Wort
Step 5
step5:Cool and Strain Wort
6

Pitch Yeast and Seal

Sprinkle the full 5g packet of dry ale yeast evenly over the surface of the cooled, strained wort in the fermentation jug; do not stir. Fit the clear silicone airlock into the jug mouth, filling the airlock halfway with clean filtered water to create an airtight one-way seal. Move the jug to a dark, consistently 65-70°F (18-21°C) space to ferment for 2 weeks, until bubbling in the airlock stops completely and the beer clarifies.

Step 6
step6:Pitch Yeast and Seal
7

Bottle and Condition Beer

Once fermentation is complete (no airlock bubbles for 3 consecutive days, clear beer with a thin layer of pale yeast sediment at the jug bottom), use the clear plastic auto-siphon to transfer beer into clean, sanitized 12oz amber glass bottles, leaving the yeast sediment undisturbed at the jug bottom. Add 1/4 tsp of corn sugar to each bottle to create natural carbonation, then seal tightly with metal crown caps. Let bottles condition at room temperature for 1 week, then chill for 24 hours before serving.

Step 7
step7:Bottle and Condition Beer

Tips

1.Use unsweetened homemade roasted sugar pumpkin puree instead of canned pumpkin pie mix: pie filling contains added sugar, preservatives, and pre-mixed spices that will throw off the beer’s balanced flavor and can cause unexpected, off-tasting fermentation byproducts.
2.Sanitize every tool that touches cooled wort (fermenter, airlock, siphon, bottles, caps) with food-grade no-rinse brewing sanitizer: wild yeast or ambient bacteria will create sour, off-flavors or spoil the entire batch if introduced.
3.Never squeeze grain bags or press pulp against the strainer when separating solids from wort: this extracts harsh, astringent tannins from grain husks and pumpkin skins that make the finished beer taste dry, bitter, and unbalanced, rather than smooth and malty.

✨ You May Also Like

Drinks & Beverages
🍜 Mexico

A bright, balanced tequila-based cocktail with zesty fresh lime, smooth orange liqueur, and a signature salt rim, perfect for warm summer sipping.

⏱️ 5 minutesDrinks & Beverages ★ 4.9
Drinks & Beverages
🍜 United States

Thick, creamy, nostalgic classic vanilla milkshake with a rich, smooth texture, topped with whipped cream and a cherry for cool, sweet refreshment.

⏱️ 5 minutesDrinks & Beverages ★ 4.7
Drinks & Beverages
🍜 United States

A bright, golden strong ale with fruity banana-clove notes, subtle hop spice, and soft carbonation, brewed in classic Trappist Tripel tradition.

⏱️ 2 hours aDrinks & Beverages ★ 4.5
Drinks & Beverages
🍜 United States

A frothy, nostalgic American soda fountain treat pairing bubbly cold root beer with creamy vanilla ice cream, perfect for cooling down at warm weather gatherings.

⏱️ 20 minuteDrinks & Beverages ★ 4.8
Drinks & Beverages
🍜 United States

Tart, funky, effervescent American Wild Ale is a complex fruity craft beer brewed with wild yeast, delivering bright, zesty notes perfect for warm-weather sipping.

⏱️ 2 hours aDrinks & Beverages ★ 4.4
Drinks & Beverages
🍜 United States

Bright, bubbly copycat of the iconic American caramel cola, balanced with citrus and warm spice, perfect for sipping ice-cold on hot days.

⏱️ 15 minuteDrinks & Beverages ★ 4.8

Pumpkin Porter:Frequently Asked Questions

1.Can I substitute canned pumpkin puree for the roasted fresh sugar pumpkin called for in this recipe? ▾
You absolutely can in a pinch, as long as you pick 100% unsweetened plain puree—not pumpkin pie filling, which has added sugar, spices, and preservatives that can ruin fermentation. For the best earthy, toasty pumpkin depth though, fresh roasted sugar pumpkin, drained of excess watery pulp, delivers a far smoother, less vegetal final flavor.
2.Why does this recipe call for both 60L crushed crystal malt and crushed chocolate malt? ▾
That combination builds the classic rich porter backbone without overpowering delicate pumpkin and spice notes. The 60L crystal malt adds deep caramel, toffee sweetness to balance roast, while the small portion of chocolate malt brings subtle roasty, cocoa-like depth that pairs perfectly with warm autumn baking spices.
3.Do I need to add extra baking spices, or do the malts carry that warm spiced flavor on their own? ▾
The base malts deliver warm, toasty caramel notes, but you’ll want a small, measured addition of whole baking spices—like one cinnamon stick, two whole cloves, and a pinch of fresh nutmeg—added in the last 10 minutes of the boil. Skip pre-ground spices to avoid harsh, dusty, overpowering flavor in your finished porter.
4.Is regular tap water fine to use, or do I really need filtered cold water for this porter? ▾
Filtered cold water is recommended for good reason: heavily chlorinated tap water can create off-flavors that taste like plastic or wet cardboard in your finished beer. If you only have tap water, leave it out uncovered for 24 hours to let chlorine dissipate, or run it through a basic activated carbon filter before brewing.
5.Can I swap light liquid malt extract for the light dry malt extract listed in the ingredients? ▾
You can make that swap easily, just adjust the quantity: use 1.2 times the weight of dry malt extract called for, since liquid extract has a higher water content. Stick to a light, neutral base rather than dark or amber extracts, so you can control color and roast level from the specialty crushed malts.
6.How long does this pumpkin porter need to condition before it’s ready to drink? ▾
After primary fermentation wraps up in 7 to 10 days, give it a minimum of 2 weeks of cold conditioning at 40–45°F to let roasty malt harshness mellow, pumpkin notes integrate, and spice flavors smooth out. It tastes even better after 4 weeks, when all the warm, autumnal flavors fully meld together.
7.Will adding pumpkin puree make my porter overly cloudy or clog my bottling equipment? ▾
It can if you skip one quick extra step: let the puree fully settle out in the fermenter after primary fermentation, and rack the beer off the thick pumpkin sediment before bottling. You can also add puree in a fine mesh hop bag during the boil to cut down on loose sediment for easier bottling.
8.What ABV does this porter land at, and is it actually a good fit for Halloween gatherings? ▾
This recipe clocks in at a very sessionable 5.5–6% ABV, which makes it ideal for crisp autumn Halloween gatherings, just as the recipe notes. It’s rich enough to feel festive and cozy, but not so strong that guests can’t enjoy a couple glasses while passing out candy or hanging around a backyard firepit.
9.Do I need fancy professional homebrewing equipment to make this as a first-time brewer? ▾
You don’t need a high-end setup at all! A basic 5-gallon homebrew starter kit with a fermenter, airlock, siphon, and bottling wand is all you need. Since this recipe uses dry malt extract instead of complex all-grain mashing, it’s extremely approachable for new homebrewers making a festive fall beer.

Comments (9)

2 weeks ago

OMG, this homemade pumpkin porter is a total game changer for our annual fall camping trip! I brewed a batch last weekend to bring up to the Rockies, and every single person around the campfire was asking for the recipe. The pumpkin notes aren’t too overpowering, it has that perfect malty sweetness, and it went so well with the campfire chili we made. 10/10 will be making this every fall from now on!

1 week ago

Dude, how long did you let it ferment after the 1 hour 15 minute cook time? I’m trying to time a batch for my Halloween party and don’t wanna cut corners!

5 days ago

So stoked you loved it for your camping trip! For a Halloween batch, we recommend letting it ferment for 2 weeks after the initial cook for the smoothest, most balanced flavor — it’s totally worth the wait!

1 week ago

SO good! I was nervous to try homebrewing for the first time because I thought it’d be way too complicated, but the medium difficulty rating was totally accurate as long as you take it step by step. My husband and his friends went through half the batch during our Sunday football watch party, and my teen even said it smelled “like fall in a glass” — that’s high praise from a 16 year old, trust me. I already have all the ingredients pulled out to make a second batch for our family Thanksgiving dinner!

5 days ago

Really solid porter recipe! The base flavor was spot on, but I added a little extra cinnamon and nutmeg because I like my pumpkin drinks a bit spicier. My only small note is that my cook time ran about 10 minutes longer than the listed 1 hour 15 minutes, probably because my old stove runs a little cool. I brought a growler to our neighborhood potluck last night and it was a huge hit right next to my husband’s smoked brisket.

3 days ago

Great call adjusting the spices to match your taste! Stove temps can vary wildly between households, so adding a little buffer time to hit that perfect gentle simmer is totally normal. So glad it was a hit at your potluck!

3 days ago

As someone who’s been homebrewing for 8 years, I can confidently say this is one of the best pumpkin porter recipes I’ve ever tested. Most recipes either taste like a mouthful of straight pie spice or you can barely tell there’s pumpkin in it, but this hits that perfect middle ground. I brought a growler to my local homebrew meetup earlier this week and people were offering to trade me their own specialty batches for a copy of the recipe!

2 days ago

Quick question — did you use fresh roasted pumpkin or canned for this? I’ve had bad luck in the past with fresh pumpkin making my brews taste watery and bland.

30 minutes ago

That means the world coming from a seasoned homebrewer! We actually recommend canned 100% pure pumpkin (not the pre-spiced pie filling!) for the most consistent flavor and texture. It cuts down on prep time too, and avoids that watery issue you mentioned.

2 days ago

Total fall meal prep win! I brewed a big batch on Sunday and have been enjoying a glass after work all week. It’s so cozy after a long day of raking leaves and running errands. The only small swap I made was adding an extra vanilla bean because I’m obsessed with warm vanilla notes in fall drinks. 10/10, no notes!

yesterday

Oh the extra vanilla bean sounds chef’s kiss! I’m planning to make this this weekend and I’m definitely stealing that swap, thanks for the idea!

2 hours ago

Quick question — did you add the vanilla bean during the boil or during fermentation? I’ve added it too early before and the flavor totally cooked off!

yesterday

My roommates and I made this for our pre-Halloween party last weekend and it was gone in 2 hours flat. We were worried it’d be too fancy for our crew of broke college students, but it was actually super doable even with our janky apartment kitchen setup. Total game changer for our fall party rotation, we’re already planning to make a spicier version for our friendsgiving next month.

2 hours ago

Really tasty recipe! I will say I messed up my first attempt because I didn’t let the wort cool enough before adding the yeast, oops. Second time around I followed the temp instructions exactly and it turned out perfect. It has such a smooth, rich flavor, way better than the overpriced store-bought pumpkin porters I’ve tried in past years.

30 minutes ago

Oh no, sorry the first batch didn’t work out! That cooling step is so easy to rush when you’re excited to get the brew going, so we’re thrilled your second batch turned out perfectly. It means so much that it beats the store-bought options for you!

30 minutes ago

Even in 90 degree Arizona fall weather, this porter hits different! I was worried a dark, malty beer would feel too heavy for our warm temps, but the pumpkin and subtle spice notes make it feel light and cozy somehow. I served it at my book club last night and all the girls were begging for the link to the recipe. Tbh I might make this year round, not just fall.

5 minutes ago

Love that it works even in warmer fall weather! It’s such a versatile brew — we’ve had other readers tell us they serve it slightly chilled in warmer climates too, which is such a fun hack. Thanks for sharing!

just now

Brewed this last night to have on hand for when my parents come to visit next month, and the tiny sample I snuck while bottling was insane. The pumpkin flavor is so warm, no weird artificial aftertaste, and the porter base is nice and roasty without being overly bitter. My golden retriever even hung out in the kitchen the whole time I was brewing, waiting for scraps (he didn’t get any, don’t worry). Can’t wait to share this with my family when they get here!