ribs on pellet grill

title 1
ribs on pellet grill
⏱️ cook time 5 hours 30 minutes
🍽️ servings 4
⚡ Difficulty medium

intro

Fall-off-the-bone tender hickory-smoked ribs with a spiced bark and sticky glossy BBQ glaze, cooked low and slow on a pellet grill for effortless, consistent backyard BBQ flavor.

Ingredients

St. Louis-style pork spare ribs 2 racks (1.8kg total)
Light brown sugar 3 tbsp
Smoked paprika 2 tbsp
Kosher salt 1.5 tbsp
Garlic powder 1 tbsp
Onion powder 1 tbsp
Freshly ground black pepper 1 tsp
Cayenne pepper 1/4 tsp
Apple cider vinegar 1/2 cup plus 2 tbsp
Water 1/2 cup
Unsalted butter 4 tbsp (sliced into pats)
Hickory wood pellets 2kg
Sweet hickory BBQ sauce 1 cup
Fresh thyme sprigs 5 sprigs

Steps

1

Prep the Rib Racks

Remove the 2 racks of St. Louis-style spare ribs from packaging, pat completely dry with paper towels. Place them on the bamboo cutting board. Use the walnut-handled boning knife to slide under the thin silver skin membrane on the bone side of each rack, grip it with a paper towel for traction, and pull it off in one smooth piece. Trim any loose hanging fat or meat flaps to create an even, uniform rack. The surface should feel dry and smooth to the touch, with no slippery membrane remaining.

Step 1
step1:Prep the Rib Racks
Step 1
step1:Prep the Rib Racks
2

Coat with Dry Rub

In the stainless steel mixing bowl, combine 3 tbsp light brown sugar, 2 tbsp smoked paprika, 1.5 tbsp kosher salt, 1 tbsp garlic powder, 1 tbsp onion powder, 1 tsp black pepper, and 1/4 tsp cayenne pepper. Stir until fully evenly mixed, with no clumps of brown sugar remaining. Sprinkle the rub generously over every surface of the trimmed ribs—top, bottom, and sides—pressing gently so the rub adheres to the meat. You should see no bare meat patches once coated. Let the ribs rest at room temperature for 20 minutes while the grill preheats, so the rub starts to form a sticky paste on the surface.

Step 2
step2:Coat with Dry Rub
Step 2
step2:Coat with Dry Rub
3

Preheat Pellet Grill

Fill your pellet grill hopper with hickory wood pellets, set the temperature to 225°F (107°C), and close the lid. Let the grill preheat for 15 minutes until it holds a steady 225°F, with thin clean blue smoke coming from the exhaust. Mix 1/2 cup apple cider vinegar and 1/2 cup water in the clear glass spray bottle, shake well to combine, and set it back in its fixed position on the counter. Place the digital meat thermometer probe within easy reach next to the grill.

Step 3
step3:Preheat Pellet Grill
4

Smoke Ribs Unwrapped

Place the seasoned rib racks bone-side down directly on the preheated pellet grill grates, close the lid, and smoke for 3 full hours at 225°F. Every 45 minutes, open the lid quickly and spritz the ribs lightly with the apple cider vinegar water mix to keep the surface moist. Do not spritz after the 2.5 hour mark, to let the bark set. At the 3 hour mark, the ribs will have a deep reddish-brown matte bark, and the rub will be fully set, not sticky to light touch. Carefully transfer the smoked ribs back to the bamboo cutting board to wrap.

Step 4
step4:Smoke Ribs Unwrapped
5

Wrap for Tender Cook

Tear two large sheets of heavy-duty aluminum foil (large enough to fully seal each rack). Place 2 tbsp of sliced butter pats on the foil under each rack, then lay the ribs meat-side down on top of the butter. Add 1 tbsp of apple cider vinegar to each foil packet around the ribs (do not pour directly on the bark), then crimp the foil tightly to create a fully sealed airtight packet. Return the foil-wrapped ribs to the pellet grill, still at 225°F, and cook for 2 more hours. At the end of this stage, the bones will pull back 1/4 inch from the end of the rib, and the meat thermometer will slide into the thickest part of the meat with no resistance, reading an internal temperature of 203°F.

Step 5
step5:Wrap for Tender Cook
Step 5
step5:Wrap for Tender Cook
6

Glaze with BBQ Sauce

Carefully remove the foil-wrapped ribs from the grill, open the foil packets (tilt away from your face to avoid hot steam burns), and transfer the ribs back to the grill grates, bone-side down. Turn the grill temperature up to 275°F (135°C). Use the boar bristle basting brush to coat the top and sides of the ribs generously with 1 cup of sweet hickory BBQ sauce. Cook the ribs unwrapped for 30 minutes, until the sauce is set into a sticky glossy glaze, not runny when lightly touched. The internal temperature should be between 200-205°F at the thickest part when done.

Step 6
step6:Glaze with BBQ Sauce
7

Rest and Slice Ribs

Once the sauce glaze is set, transfer the finished ribs to the matte off-white ceramic serving platter. Tent loosely with a small sheet of aluminum foil, and let the ribs rest for 10 minutes to let juices redistribute back into the meat (skip this step and juices will run out onto the platter when you slice). After resting, use the walnut-handled boning knife to slice cleanly between each bone, creating individual rib pieces. Fan the sliced ribs slightly across the platter, and sprinkle with fresh thyme leaves for a bright, herby garnish.

Step 7
step7:Rest and Slice Ribs

Tips

1.Always remove the full silver skin membrane from the bone side of the ribs: this tough connective tissue does not break down during low-and-slow cooking, and will leave a chewy, rubbery texture under the rub if left attached. Grip the loose membrane edge with a paper towel for extra traction to avoid slipping.
2.Wait until your pellet grill produces thin, wispy blue smoke before adding ribs: thick, billowing white smoke is a sign of incomplete wood combustion, and will leave a bitter, sooty aftertaste on the rib bark instead of smooth, sweet hickory flavor.
3.Resist frequent lid peeks during the smoking stage: every lid lift drops the grill temperature by 10-15°F, adds 10-15 minutes to total cook time, and can cause uneven bark formation. Only open the lid to spritz, wrap, or sauce per the recipe timeline.

✨ You May Also Like

BBQ & Grilling
🍜 United States

Tender, melt-in-your-mouth beef brisket with a crisp, spiced bark, slow-smoked to deep smoky perfection, the iconic centerpiece of Texas backyard barbecue.

⏱️ 12 hours BBQ & Grilling ★ 4.4
BBQ & Grilling
🍜 Korea

Tender, sweet-savory marinated beef short ribs, a beloved Korean BBQ staple with caramelized, slightly charred edges and deep umami flavor, perfect for outdoor summer gatherings.

⏱️ 4 hours 2BBQ & Grilling ★ 4.8
BBQ & Grilling
🍜 United States

Juicy grilled beef patties topped with smoky homemade chili, melted cheddar, and tangy pickles on toasted brioche buns for a hearty, flavor-packed handheld meal.

⏱️ 40 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

A sweet, smoky, tangy BBQ sauce brightened with peak-season dark cherries, ideal for glazing grilled ribs, chicken, pork, or summer roasted veggies.

⏱️ 35 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

Rich, smoky, slightly sweet homemade bourbon BBQ sauce with deep caramel notes, ideal for glazing grilled ribs, chicken, and burgers at cookouts.

⏱️ 25 minuteBBQ & Grilling ★ 4.7
BBQ & Grilling
🍜 United States

Iconic Alabama-style BBQ featuring tender hickory-smoked chicken slathered in tangy creamy white sauce, a beloved regional Southern cookout staple.

⏱️ 3 hoursBBQ & Grilling ★ 5

ribs on pellet grill:Frequently Asked Questions

1.Do I have to use St. Louis-style pork spare ribs for this recipe, or can I substitute baby back ribs? ▾
St. Louis-style spare ribs are ideal here because their even marbling and trimmed, uniform shape cooks consistently for that perfect tender bite, but baby back ribs work as a substitute. Just cut total cook time by 45–60 minutes, since they’re smaller and leaner, and test for tenderness early to avoid drying them out.
2.What wood pellet flavor works best for these ribs, and is hickory the only good option? ▾
Hickory is my go-to for that classic, bold BBQ rib flavor that pairs perfectly with the spiced paprika rub and sweet brown sugar glaze, but it’s not your only option. Mild apple or cherry adds a subtle fruity sweetness, or a 50/50 hickory-maple mix works for a smoother, less assertive smoke profile for folks who prefer milder BBQ.
3.Do I need to remove the thin membrane from the back of the ribs before cooking? ▾
Absolutely—skipping this step is one of the most common rib mistakes. That papery membrane on the bone side turns tough and chewy when cooked, and it blocks rub and smoke from penetrating the meat. Slide a butter knife under it at one end, grip it with a paper towel for traction, and peel it off in one smooth sheet before seasoning.
4.What temperature should I set my pellet grill to get that signature fall-off-the-bone texture? ▾
Hold your pellet grill at a steady 225°F for the entire cook for the best results. This low, consistent temperature lets the tough connective tissue in the ribs break down slowly without seizing up, creating that tender pull-apart texture, while giving the spiced rub time to form a flavorful bark and smoke to infuse evenly.
5.How do I tell when the ribs are done, instead of just relying on estimated cook time? ▾
Skip the guesswork with two simple, reliable tests: first, insert an instant-read thermometer into the thickest part of the meat (avoiding bone) — it should read 195–203°F. Second, do the bend test: pick up one rack end with tongs, and if the ribs crack slightly and pull 1/4 inch from the bone when bounced gently, they’re done.
6.Do I need to wrap the ribs during cooking, and what should I wrap them in? ▾
Wrapping is key to locking in moisture and nailing that fall-off-the-bone texture without ruining your spiced bark. After the first 3 hours of unwrapped smoke, wrap the ribs tightly in heavy-duty aluminum foil (add a spritz of apple juice or pat of butter for extra moisture if you like) for the next 2 hours before glazing.
7.When should I brush on the BBQ glaze to get that sticky, glossy finish without burning it? ▾
Apply your BBQ glaze during the final 30 minutes of cook time, right after you take the ribs out of the foil. The low grill temperature will set the glaze into that perfect sticky, shiny coating without burning the brown sugar in the sauce, which turns bitter and ruins your bark if applied too early in the cook.
8.Can I apply the dry rub to the ribs the night before I plan to cook them? ▾
Absolutely, and pre-seasoning the night before actually leads to better, deeper flavor! After removing the membrane, coat the ribs evenly with your salt, paprika, garlic powder, and brown sugar rub, set them on a wire rack over a baking sheet, and cover loosely in the fridge. The salt will pull out moisture that mixes with the rub to form a richer bark.
9.Why is my rib bark rubbery instead of the crisp, spiced crust I want? ▾
Rubbery bark usually stems from one of three common missteps: you wrapped the ribs too early before the rub had time to set, you spritzed the ribs too often during the initial smoke phase which kept the surface wet, or your grill temp ran too low, causing excess moisture buildup. Stick to the 3-hour unwrapped smoke start at 225°F for crisp bark.
10.How long should I let the ribs rest after coming off the pellet grill before slicing and serving? ▾
Let your ribs rest for 10–15 minutes tented loosely with foil after you pull them off the grill. This short rest lets the hot, rendered juices redistribute back through the meat instead of running all over your cutting board when you slice, so every bite stays juicy and tender instead of drying out immediately after cutting.

Comments (3)

2 days ago

OMG these were an absolute game changer for our Sunday family dinner! I’ve tried so many pellet grill rib recipes before and they always came out either too tough or so mushy the meat slid right off before we even got them to the table, but this method was perfect. My 8-year-old who turns his nose up at basically any meat that isn’t a chicken nugget ate two full ribs and asked if we could make these for his fall soccer team potluck next month. Total hit, 10/10, will be making these all tailgate season long!

yesterday

Wait did you use baby backs or spares? I’ve got a pack of spares in the fridge I was gonna throw on the smoker this weekend and wondering if I need to adjust the cook time at all!

2 hours ago

So glad these were a hit with your family, Liz! For spare ribs, you can add about 45 minutes to the initial unwrapped smoke phase to get that same fall-off-the-bone texture without them getting mushy — just make sure you’re spritzing every 45 minutes too! Can’t wait to hear how the potluck batch turns out.

30 minutes ago

Tried these last night for my first ever rib cook on my new pellet grill and I was shocked how well they turned out! I was worried the medium difficulty rating would be too much for a total newbie but the steps were super straightforward, no fancy equipment needed. The only swap I made was using apple cider vinegar for the spritz instead of apple juice because that’s what I had in the pantry, and they still came out SO good. My roommate said they were better than the ribs we got at that fancy BBQ spot downtown last month.

5 minutes ago

That apple cider vinegar swap is chef’s kiss, honestly! It adds such a nice tang that cuts through the richness of the rib meat, I do that half the time myself. So stoked these worked out for your first rib cook — that’s the best way to break in a new pellet grill if you ask me!

1 week ago

Made a double batch of these on Sunday for meal prep for the week and they held up so much better than I expected! I wrapped individual portions in foil and tossed them in the fridge, and 3 days later they still tasted just as juicy as the day I made them. I was worried the 5 and a half hour cook time would be a pain on a weekend but it was totally hands off for most of it so I got all my laundry and cleaning done while the pellet grill did its thing. Only knocking off one star because I wish there was a note about how much rub to use per rack — I ended up over-seasoning the first rack a little but it was an easy fix for the second one. Already have this saved to my permanent recipe rotation!