Kristallweizen
intro
Crisp, crystal-clear Bavarian wheat beer with delicate banana and clove notes, bright carbonation, and a clean dry finish—perfect for sipping ice-cold on hot summer days.
Ingredients
Steps
Sanitize All Equipment
Mix 1 capful of no-rinse brewing sanitizer with 4L of cool water in the 2-gallon stainless steel stock pot. Submerge the stirring spoon, thermometer, strainer, funnel, auto-siphon, fermentation jug airlock, and bottle caps in the solution for 60 seconds. Remove and air-dry on the clean counter; do not wipe with a towel to avoid introducing bacteria. All surfaces that will touch the beer must be fully sanitized to prevent off-flavors.
Heat Brewing Water
Pour 3L of filtered cold water into the sanitized 2-gallon stock pot. Clip the digital thermometer to the pot rim, then heat over medium heat to exactly 65°C (150°F), stirring occasionally with the slotted spoon. Do not bring to a rolling boil at this stage to avoid scorching malt extract later.
Add Malt Extract
Slowly pour all 1.5kg of light dry wheat malt extract into the 65°C water, stirring constantly with the slotted spoon to fully dissolve all powder and prevent clumps from sticking to the pot bottom. Once fully dissolved, increase heat to medium-high to bring the wort (unfermented beer) to a gentle rolling boil, watching closely to avoid boil-over.
Boil with Hops
Once the wort reaches a steady rolling boil, add 10g of Hallertau Mittelfruh hop pellets, set the 60-minute timer, and maintain a gentle rolling boil (adjust heat as needed to prevent boil-over). With 5 minutes remaining on the timer, add the remaining 5g of hop pellets for soft floral aroma. Leave the pot uncovered during the boil to allow harsh, off-flavor sulfur compounds to evaporate.
Cool Wort Rapidly
When the 60-minute boil finishes, turn off heat immediately. Move the pot to a sink ice bath (cold water and ice filling the sink to halfway up the pot sides) to cool the wort to 21°C (70°F) within 20 minutes, stirring gently every 5 minutes to speed cooling. Rapid cooling reduces bacterial risk and creates a compact cold break sediment layer for clearer final beer.
Transfer to Fermenter
Set the sanitized fine-mesh strainer over the mouth of the 1-gallon glass fermentation jug. Pour cooled wort through the strainer into the jug to catch hop solids and cold break sediment. Top up the jug with remaining filtered water to reach the 1-gallon mark, cap tightly, and shake vigorously for 30 seconds to aerate the wort for healthy yeast. Sprinkle the full packet of WB-06 wheat beer yeast onto the wort surface, seal with a sanitizer-filled airlock, and store in a dark 18-21°C (65-70°F) space for 14 days until fermentation completes (no more bubbles rising through the airlock).
Filter and Bottle
Once fermentation is complete and the beer is perfectly clear, sanitize the auto-siphon, funnel, and amber bottles. Dissolve 80g of corn sugar in 100ml boiling water, cool to 21°C, and add to a clean sanitized container. Siphon clear beer off the pale yeast sediment layer at the bottom of the fermenter into the container with priming sugar, stir gently to combine, then siphon into each amber bottle, leaving 2cm of headspace. Cap each bottle tightly with the bottle capper and crown caps.
Condition and Serve
Store capped bottles in the same dark 21°C space for 7 days to allow priming sugar to carbonate the beer fully, then chill bottles for at least 24 hours in the refrigerator before serving. Pour slowly into a tilted wheat beer glass, leaving any trace of yeast sediment in the bottle to preserve Kristallweizen's signature crystal clarity. Garnish with a thin lemon slice if desired.
Tips
2.Rapid wort cooling after the boil is critical for signature Kristallweizen clarity: slow cooling allows fine protein particles to stay suspended in the beer, resulting in a hazy finish instead of the brilliant, sparkling transparency the style is known for.
3.When pouring, hold your glass at a 45-degree angle and pour slowly down the inner side to preserve soft carbonation and build a stable, lacy white head. Straighten the glass when it is two-thirds full to top up the foam without causing overflow.

OMG, this Kristallweizen came out SO good! I’ve messed up so many wheat beer recipes before because I could never get that crystal clear finish without stripping out that classic banana/clove flavor we all love, but this method nailed it. Brought a growler to our neighborhood potluck last weekend and everyone was asking for the recipe — total game changer. Only note is I let mine condition an extra 3 days in the keg and it was perfect.
I was nervous to try this because medium difficulty felt intimidating for someone who’s only made basic hard seltzers at home before, but this was way more approachable than I thought! My husband is obsessed with Bavarian wheat beers and he said this tasted exactly like the ones we had on our Munich trip a couple years ago. Served it at our Sunday family dinner with bratwursts and sauerkraut, chef’s kiss.
Y’all, I made this for our college football tailgate last Saturday and it was gone before the first quarter even ended! So crisp, not heavy like the cloudy hefeweizens I usually make, perfect for 80 degree game day weather. Will absolutely be making a double batch for our next tailgate in two weeks.
Hmm, my first batch turned out a little more bitter than I expected? I followed the hop measurements exactly, so I’m not sure what went wrong. It’s still drinkable, just not as smooth as the Kristallweizen I’ve had at German restaurants. Any ideas where I messed up?
I’ve been searching for a solid Kristallweizen recipe forever to add to my annual Oktoberfest potluck spread, and this is the one! The 90 minute cook time was totally manageable even with a million other appetizers and sides I was prepping that day. My kids loved the little non-alcoholic version I made by halting fermentation early for them, said it tasted like sparkling banana lemonade. Win win!
Solid recipe! Turned out super clear, had that perfect light wheat flavor, went amazing with the grilled brats and potato salad I made for our Labor Day cookout. Only knock is I wish there was a note about how long to let it carbonate in the bottle, I waited a week and it was a little flat, waited another 4 days and it was perfect.
Just bottled my third batch of this last night! Every single time it comes out perfectly crisp, that subtle vanilla and banana note is spot on for classic Kristallweizen. I’ve converted so many of my friends who swear they “hate wheat beer” with this recipe, they can’t get over how light and smooth it is. 10/10
First time making any beer that wasn’t a pre-made extract kit, and this turned out way better than I expected! I was worried about the medium difficulty rating, but the step-by-step for the cold break to get that crystal clear finish was so easy to follow. I did accidentally add a tiny extra bit of lemon peel at the end, but it actually added a really nice bright zing that I loved.